Engine Oil Cooler - Remove and Install
`
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement
[UENR3838]
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement
Engine Oil Filter and Oil Filter Base - Remove and Install
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement
Engine Oil Cooler - Remove and Install
COOLING SYSTEM
COOLER GP
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement
Cooling System Package (Radiator, Fan Group, Aftercooler, Hydraulic Oil Cooler, Refrigerant Condenser) - Remove and Install
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement
Cooling System Package (Radiator, Fan, Fuel Cooler, Aftercooler, Hydraulic Oil Cooler) - Remove and Install
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement
Engine Oil Cooler - Remove and Install
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement
Engine Oil Cooler - Remove and Install
1.1. Removal Procedure
2.1. Installation Procedure
Start By:
- Remove the crankcase guard.
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
- Drain the coolant. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change" for the correct draining and filling procedures.
Show/hide table
Illustration 1 g03713032 - Open door (1).
Show/hide table
Illustration 2 g03712601 Typical Example - Remove panel (2).
Show/hide table
Illustration 3 g03712605 - Remove clips (3).
- Disconnect hoses (4) and hose (8).
- Disconnect hose assemblies (5).
- Remove hose assemblies (6).
- Disconnect harness assembly (7).
Show/hide table
Illustration 4 g03713033 - Remove bolts (10) and washers. Remove elbow (9) and the O-ring seal.
Show/hide table
Illustration 5 g03713076 - Remove bolts (11) and the washers. Remove bonnet (12), the gasket, and the O-ring seal.
Show/hide table
Illustration 6 g03713079 Viewed from beneath the machine. - Remove bolts (13) and bolts (14) and the washers.
Show/hide table
Illustration 7 g03713086 - Remove engine oil cooler (15) and the O-ring seals.
- Install engine oil cooler (15) in the reverse order of removal.
- Lubricate the bore at both ends of engine oil cooler (15) with the lubricant that is being sealed.
- Lubricate the bore of elbow (9) with the lubricant that is being sealed.
Information System:
D5R2 and D6R2 Track-Type Tractors
Machine Preparation for Troubleshooting
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement
Engine Oil Filter and Oil Filter Base - Remove and Install
D6N Track-Type Tractor
Location of Components (HVAC System)
950 GC Wheel Loader Machine Systems
Refrigerant Receiver-Dryer - Remove and Install
D5R2 and D6R2 Track-Type Tractors
General Information
986H Wheel Loader
Fixed Axle (Front) - Remove and Install
926M, 930M, and 938M Small Wheel Loader
Diesel Exhaust Fluid Filter - Replace
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement
Hydraulic Oil Cooler - Remove and Install
D6N Track-Type Tractor
HVAC System
986H Wheel Loader
Axle Shaft - Remove and Install
Installation of 7S (S/N: RL7) and 7SU (S/N: RT7) on D7R Track-Type Tractor{6050, 6051, 6060, 6078}
950 GC Wheel Loader Machine Systems
Refrigerant Condenser - Remove and Install
D5R2 and D6R2 Track-Type Tractors
Visual Inspection
2014/10/20
New Product Link and VIMS 3G Software for 523 and A4:N4 Modules Is Now Available for Certain Series M and Series K Wheel Loaders {7601, 7606, 7620}
C3.4B Engines
DEF Pressure Is High
Differential Retrofit for the 990H Front Axle{3258}
D5R2 and D6R2 Track-Type Tractors
Service Tools
986H Wheel Loader
Final Drive, Brake, Wheel, and Spindle - Remove and Install
986H Wheel Loader
Service Brake - Remove and Install
D3K2, D4K2 and D5K2 Track-Type Tractors Systems
Fast Fill Fuel System
C3.4B Engines
DEF Does Not Purge
D6R2 Track-Type Tractor Systems
Calibrations (Cat ET)
D6R2 Track-Type Tractor Systems
Calibration Error Codes
986H Wheel Loader
Final Drive and Wheel - Remove and Install