950 GC Wheel Loader Machine Systems Refrigerant Receiver-Dryer - Remove and Install Caterpillar


Refrigerant Receiver-Dryer - Remove and Install
`
1.1. Removal Procedure
2.1. Installation Procedure

Removal Procedure

  1. Move the disconnect switch to the OFF position.

    ------ WARNING! ------

    Personal injury can result from contact with refrigerant.

    Contact with refrigerant can cause frost bite. Keep face and hands away to help prevent injury.

    Protective goggles must always be worn when refrigerant lines are opened, even if the gauges indicate the system is empty of refrigerant.

    Always use precaution when a fitting is removed. Slowly loosen the fitting. If the system is still under pressure, release it slowly in a well ventilated area.

    Personal injury or death can result from inhaling refrigerant through a lit cigarette.

    Inhaling air conditioner refrigerant gas through a lit cigarette or other smoking method or inhaling fumes released from a flame contacting air conditioner refrigerant gas, can cause bodily harm or death.

    Do not smoke when servicing air conditioners or wherever refrigerant gas may be present.

    Use a certified recovery and recycling cart to properly remove the refrigerant from the air conditioning system.


  2. Recover the air conditioner refrigerant from the air conditioner system. Refer to Service Manual, SENR5664, "All Products Air Conditioning and Heating R134a for All AVSpare Machines" for the recovery procedure. Refer to Special Publication, NENG2500, "Air Conditioning Tools" for the tools


    Illustration 1g03712495

  3. Remove cover (1).


    Illustration 2g03712510

  4. Disconnect hose assemblies (2). Remove clamps (3) and refrigerant receiver dryer (4).

Installation Procedure

  1. Install refrigerant receiver dryer (4) in the reverse order of the removal.

Information System:

D5R2 and D6R2 Track-Type Tractors General Information
986H Wheel Loader Fixed Axle (Front) - Remove and Install
926M, 930M, and 938M Small Wheel Loader Diesel Exhaust Fluid Filter - Replace
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement Hydraulic Oil Cooler - Remove and Install
D6N Track-Type Tractor HVAC System
986H Wheel Loader Axle Shaft - Remove and Install
Installation of 7S (S/N: RL7) and 7SU (S/N: RT7) on D7R Track-Type Tractor{6050, 6051, 6060, 6078}
950 GC Wheel Loader Machine Systems Refrigerant Condenser - Remove and Install
Installation of No. 7 Ripper (RMP) on D7R Track-Type Tractor{6310, 6324, 6325}
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement Fuel Cooler - Remove and Install
D3K2, D4K2 and D5K2 Track-Type Tractor Systems Brake System
D6N Track-Type Tractor Calibration Error Codes
D6N Track-Type Tractor Location of Components (HVAC System)
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement Engine Oil Filter and Oil Filter Base - Remove and Install
D5R2 and D6R2 Track-Type Tractors Machine Preparation for Troubleshooting
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement Engine Oil Cooler - Remove and Install
D5R2 and D6R2 Track-Type Tractors Visual Inspection
2014/10/20 New Product Link and VIMS 3G Software for 523 and A4:N4 Modules Is Now Available for Certain Series M and Series K Wheel Loaders {7601, 7606, 7620}
C3.4B Engines DEF Pressure Is High
Differential Retrofit for the 990H Front Axle{3258}
D5R2 and D6R2 Track-Type Tractors Service Tools
986H Wheel Loader Final Drive, Brake, Wheel, and Spindle - Remove and Install
986H Wheel Loader Service Brake - Remove and Install
D3K2, D4K2 and D5K2 Track-Type Tractors Systems Fast Fill Fuel System