950 GC Wheel Loader Machine Systems Refrigerant Condenser - Remove and Install Caterpillar


Refrigerant Condenser - Remove and Install
`
1.1. Removal Procedure
2.1. Installation Procedure

Removal Procedure

------ WARNING! ------

Personal injury can result from contact with refrigerant.

Contact with refrigerant can cause frost bite. Keep face and hands away to help prevent injury.

Protective goggles must always be worn when refrigerant lines are opened, even if the gauges indicate the system is empty of refrigerant.

Always use precaution when a fitting is removed. Slowly loosen the fitting. If the system is still under pressure, release it slowly in a well ventilated area.

Personal injury or death can result from inhaling refrigerant through a lit cigarette.

Inhaling air conditioner refrigerant gas through a lit cigarette or other smoking method or inhaling fumes released from a flame contacting air conditioner refrigerant gas, can cause bodily harm or death.

Do not smoke when servicing air conditioners or wherever refrigerant gas may be present.

Use a certified recovery and recycling cart to properly remove the refrigerant from the air conditioning system.


  1. Recover the air conditioner refrigerant from the air conditioner system. Refer to Service Manual, SENR5664, "All Products Air Conditioning and Heating R134a for All AVSpare Machines" for the recovery procedure. Refer to Special Publication, NENG2500, "Air Conditioning Tools" for the tools


    Illustration 1g03712356

  2. Remove hose assemblies (1).


    Illustration 2g03712362

  3. Remove bolts (2) and refrigerant condenser (3).

Installation Procedure

  1. Install refrigerant condenser (3) in the reverse order of removal.

Information System:

Installation of No. 7 Ripper (RMP) on D7R Track-Type Tractor{6310, 6324, 6325}
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement Fuel Cooler - Remove and Install
D3K2, D4K2 and D5K2 Track-Type Tractor Systems Brake System
D6N Track-Type Tractor Calibration Error Codes
950 GC Wheel Loader Engine Supplement Refrigerant Compressor - Remove and Install
D6N Track-Type Tractor Electronic Control (Steering System)
C3.4B Engines DEF Module Does Not Respond
924K, 930K and 938K Wheel Loaders Fuel System Primary Filter (Water Separator) Element - Replace
2014/08/18 Improved Radiator Support Pin Assemblies and Support Bar Assemblies Are Now Used On D11T Track-Type Tractors Equipped With Copper Tube Grommeted Radiators {1353}
C3.4B Engines DEF Concentration Is Incorrect
950 GC Wheel Loader Machine Systems Loader Frame from Rear Frame - Separate
D6N Track-Type Tractor Additional Electrical Components
Installation of 7S (S/N: RL7) and 7SU (S/N: RT7) on D7R Track-Type Tractor{6050, 6051, 6060, 6078}
986H Wheel Loader Axle Shaft - Remove and Install
D6N Track-Type Tractor HVAC System
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement Hydraulic Oil Cooler - Remove and Install
926M, 930M, and 938M Small Wheel Loader Diesel Exhaust Fluid Filter - Replace
986H Wheel Loader Fixed Axle (Front) - Remove and Install
D5R2 and D6R2 Track-Type Tractors General Information
950 GC Wheel Loader Machine Systems Refrigerant Receiver-Dryer - Remove and Install
D6N Track-Type Tractor Location of Components (HVAC System)
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement Engine Oil Filter and Oil Filter Base - Remove and Install
D5R2 and D6R2 Track-Type Tractors Machine Preparation for Troubleshooting
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement Engine Oil Cooler - Remove and Install