EPC Parts Catalogs

966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train Transmission from Output Transfer Gears - Separate Caterpillar


  1. Home
  2. Disassembly and Assembly
  3. #149644
Transmission from Output Transfer Gears - Separate
`
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train [UENR0378]
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train Output Transfer Gears - Assemble
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train Transmission to Output Transfer Gears - Connect
POWER TRAIN
GEAR GP
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train Torque Converter, Transmission and Output Transfer Gears - Remove and Install
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train Torque Converter from Transmission, Output Transfer Gears - Separate
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train Torque Converter to Transmission, Output Transfer Gears - Connect
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train Parking Brake - Disassemble
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train Parking Brake - Assemble
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train Output Transfer Gears - Disassemble
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train Output Transfer Gears - Assemble
1.1. Separation Procedure

Separation Procedure

Show/hide table
Table 1
Required Tools 
Tool  Part Number  Part Description  Qty 
A  439-3938  Link Bracket  3 
B  154-6181  Forcing Screw  3 

Start By:

  1. Separate the torque converter from the transmission.

Show/hide table
NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.

Note: A CWS login is required to access AVSpare Channel1. Scan the QR code with a QR enabled device or copy the link that follows.

Show/hide table
Illustration 1g06428137

Reference: For more information, refer to "966 GC Wheel Loader Transmission from Output Transfer Gears – Separate" on AVSpare Channel1.

https://channel1.mediaspace.kaltura.com/media/0_rhnm2dj4
    Show/hide table
    Illustration 2g03367331

  1. Remove bolts (1) and tube assembly (2).
    Show/hide table
    Illustration 3g03367336

  2. Disconnect harness assemblies (3).
    Show/hide table
    Illustration 4g03367344

  3. Attach Tooling (A) and a suitable lifting device to transmission (4). The weight of transmission (4) is approximately 425 kg (936 lb).
    Show/hide table
    Illustration 5g06535471

  4. Remove bolts (5) that connect transmission (4) with output transfer gears (6).
    Show/hide table
    Illustration 6g06535473

  5. Use Tooling (B) to separate transmission (4) from output transfer gears (6).

  6. Remove transmission (4).

Information System:

3516E Engines for Caterpillar Built Machines Engine Oil and Water Pump Drive - Assemble
826K Landfill Compactor Additional Messages
836K Landfill Compactor, 834K Wheel Dozer and 988K Wheel Loader Power Train Fixed Axle (Front) - Remove and Install
3516E Engines for Caterpillar Built Machines Engine Oil and Water Pump Drive - Disassemble
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train Output Transfer Gears - Assemble
3516E Engines for Caterpillar Built Machines Camshaft Bearings - Remove and Install
Installation Procedure of the 210-1704 Front Lines Gp {5051, 5057, 6129}
3516E Engines for Caterpillar Built Machines Crankshaft Rear Seal and Wear Sleeve - Remove and Install
3516E Engines for Caterpillar Built Machines Crankshaft Front Seal and Wear Sleeve - Remove and Install
2013/04/11 Manual Tilt Brace Is Now Available For Certain D6R Track-Type Tractors {6050}
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train Output Transfer Gears - Disassemble
D8R Track-Type Tractor Power Train Equalizer Bar - Install
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train Transmission to Output Transfer Gears - Connect
D6K Track-Type Tractor Refrigerant Dryer - Replace
966H and 972H Wheel Loaders Machine Systems Enclosed Rollover Protective Structure (ROPS)
C13, C15, and C18 Tier 4 Final Engines Alternator and Regulator
C13, C15, and C18 Tier 4 Final Engines Radiator
C13, C15, and C18 Tier 4 Final Engines Alternator and Regulator
C13, C15, and C18 Tier 4 Final Engines Radiator
2013/04/25 New Product Link and VIMS Software For PL523 and A4N4 Modules Is Now Available For Certain Caterpillar Products {7601, 7606, 7620}
Procedure for Inspecting and Installing Fuse Block As on Certain Series K Wheel Loaders{1408, 1417}
2013/05/06 Improved Position Sensor Is Now Used On Certain Wheel Loaders {1439, 5736, 5737}
Installing Product Link Kit for Communication Using Satellite Link{1408, 7490, 7494, 7601, 7603, 7606, 7610, 7620}
988K XE Wheel Loader Power Train Service Brake - Remove and Install