Power Train Oil Cooler - Remove and Install
`
C9.3 Engine and D7E Track-Type Tractors
[KENR8118]
C9.3 Engine and D7E Track-Type Tractors
Water Temperature Regulator - Remove and Install
C9.3 Engine and D7E Track-Type Tractors
Valve Mechanism Cover - Remove and Install
TRANSMISSION
C9.3 Engine and D7E Track-Type Tractors
Power Train Oil Cooler - Remove and Install
C9.3 Engine and D7E Track-Type Tractors
Power Train Oil Cooler - Remove and Install
1.1. Removal Procedure
2.1. Installation Procedure
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
- Attach a suitable lifting device to oil cooler assembly (2). The weight of oil cooler assembly (2) is approximately
82 kg (180 lb) . Remove bolts (1), bracket (3), and oil cooler assembly (2).Show/hide table
Illustration 2 g01951175 - Remove bonnet (4) and bonnet (8) from core assembly (7).
- Remove heater assembly (6) and adapter (5) from bonnet (4).
Show/hide table
Illustration 3 g03356820 - Note orientation of diverter valve (9) for installation purposes.
Show/hide table
| |
| Illustration 1 | g01951171 |
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 5P-3413 | Sealant | - |
- Install adapter (5) into bonnet (4). Apply Tooling (A) to heater assembly (6). Install heater assembly (6) into adapter (5).
- Install bonnet (4) and bonnet (8) onto core assembly (7).
Show/hide table
Illustration 5 g01951171 - Attach a suitable lifting device to oil cooler assembly (2). The weight of oil cooler assembly (2) is approximately
82 kg (180 lb) . Install oil cooler assembly (2), bracket (3), and bolts (1).
Show/hide table
| |
| Illustration 4 | g01951175 |
Information System:
953D Track-Type Loader Machine Systems
Window Wiper and Wiper Motor
C3.4B Engines for Caterpillar Built Machines
Alternator - Test
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train
MID 081 - CID 0070 - FMI 04
AD55B Underground Articulated Truck
Additional Messages
AD55B Underground Articulated Truck
Safety Messages
966H Wheel Loader and 972H Wheel Loader Braking and Hydraulic Fan System
Pressure Switch (Parking Brake Oil)
D6T Track-Type Tractor Systems
Hydraulic Fan Speed (On Demand) - Test and Adjust
Camshaft Lobe Hits Fuel Transfer Pump.{1210, 1256}
953D, 963D and 973D Track-Type Loaders
Ripper Does Not Function
953D, 963D and 973D Track-Type Loaders
Implement Cycle Time Is Fast
C12 Marine Engines and C12 Power Package
Maintenance Recommendations
973D Track-Type Loader
Declaration of Conformity
Piston Seizures on C18 Engines{1225, 1331}
D7E Track-Type Tractor Hydraulic, HVAC, and Electrical Systems
Hydraulic System Oil Contains Air
D7E Track-Type Tractor Hydraulic, HVAC, and Electrical Systems
Hydraulic System Oil Level Is Low
D7E Track-Type Tractor Hydraulic, HVAC, and Electrical Systems
Hydraulic System Oil Temperature Is High
953D, 963D and 973D Track-Type Loaders
Steering Does Not Function
953D, 963D and 973D Track-Type Loaders
Steering Does Not Function in One Direction
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train
MID 081 - CID 0070 - FMI 03
973D Track-Type Loader Machine Systems
Window Wiper and Wiper Motor
D6T XE Electrical & Hydraulic Troubleshooting
Hydraulic Fan Does Not Function
988H Wheel Loader
Declaration of Conformity
D6T XE Electrical & Hydraulic Troubleshooting
Hydraulic Fan Does Not Shut Off
980H Wheel Loader
Declaration of Conformity