C9.3 Engines for Caterpillar Built Machines Engine Control Module - Remove and Install Caterpillar


Engine Control Module - Remove and Install
`
C9.3 Engines for Caterpillar Built Machines [UENR0130]
ELECTRICAL AND STARTING SYSTEM
ELECTRONICS GP-ENGINE
C9.3 Engines for Caterpillar Built Machines Engine Control Module - Remove and Install
C9.3 Engines for Caterpillar Built Machines Speed/Timing Sensor - Remove and Install
1.1. Removal Procedure
2.1. Installation Procedure

Removal Procedure

  1. Disconnect the battery. Refer to Operation and Maintenance Manual, "Battery or Battery Cable - Disconnect".


    Illustration 1g06124425


    Illustration 2g06124722

  2. Remove bolts (1) and remove cover (2).

  3. Remove bolts (3) and (4). Position the harness assembly out of the way.


    Illustration 3g06124784

  4. Remove bolt (7). Disconnect hose assemblies (5) and (8).

  5. Remove plate (6).


    Illustration 4g01947158

  6. Remove studs (9). Remove engine control module (10), the washers, and the isolation mounts.

Installation Procedure

  1. Install engine control module (10) in reverse order of removal.

    1. Tighten bolt (3) to a torque of 7 ± 0.5 N·m (62 ± 5 lb in).

Information System:

2009/06/29 Improvements to the Lines Group for the Lift Cylinder on 938H and IT38H Machines {5057, 5102}
C6.6 Industrial Engine Exhaust Gas Valve (NRS)
973D Track-Type Loader Power Train Hydrostatic Drive Motor
966H and 972H Wheel Loaders Machine Systems Lubrication Pump (Automatic) - Disassemble
966H and 972H Wheel Loaders Machine Systems Lubrication Pump (Automatic) - Assemble
Generator Bearing Service {4457}
973D Track-Type Loader Power Train Track Roller
C4.4 Industrial Engine Refrigerant Compressor
2009/06/29 An Improved Adjustable Armrest Is Now Available {7307}
725C, 725C2, 730C, 730C Ejector, 730C2, 730C2 EJ, 735B, 735C, 740B, 740B Ejector, 740C Ejector and 745C Articulated Trucks VIMSTM</SUP> 3G Using Caterpillar Electronic Technician to Determine Diagnostic Codes
973D Track-Type Loader Power Train General Information
2009/07/06 The Undercarriage Has Been Changed To Camber Only {4150}
973D Track-Type Loader Power Train Location of Electrical Components
973 K Track-Type Loaders Equalizer Bar
973 K Track-Type Loaders Front Idler and Recoil Spring
3500 Engines Prelubrication Oil Pump - Remove and Install
3500 Engines Electronic Control Module (Engine) - Remove and Install
2009/07/06 Water Temperature Regulators (Thermostats) Have Been Redesigned {1355, 1380, 1393}
2009/07/01 Water Temperature Regulators (Thermostats) Have Been Redesigned {1355, 1380, 1393}
D4 and D6K Track-Type Tractor Restricted Visibility
D7E Track-Type Tractor Power Train Systems Power Train Oil Contains Air
Field Installation of the Product Link PL321{7606}
Field Installation of the Communication Installation Group{7606}
Field Installation of the Communication Installation Group that is Product Link 321SR{7606}