Engine Control Module - Remove and Install
`
C13 Engine for Caterpillar Built Machines
[UENR0131]
C13 Engine for Caterpillar Built Machines
Cylinder Head - Remove and Install
C13 Engine for Caterpillar Built Machines
Exhaust Elbow - Remove and Install
ELECTRICAL AND STARTING SYSTEM
ELECTRONICS GP-ENGINE
C13 Engine for Caterpillar Built Machines
Engine Control Module - Remove and Install
1.1. Removal Procedure
2.1. Installation Procedure
- Disconnect the battery. Refer to Operation and Maintenance Manual, "Battery or Battery Cable - Disconnect".
- Turn the fuel supply to the OFF position.
- Remove bolts (1), and (2). and position harness assemblies (3) and (4 ) out of the way.
Show/hide table
Illustration 2 g02176838 - Disconnect hose assemblies (5).
Show/hide table
Illustration 3 g02176851 - Remove nuts (6), washers (7), spring pins (8), washers (9), nuts (10), ground strap, (11), washers (12), isolation mounts (13), and () engine control module (14).
Show/hide table
![]() | |
Illustration 1 | g01916974 |
- Install engine control module (14) in reverse order of removal.
Information System:
C13, C15, and C18 Tier 4 Interim Engines
Exhaust Temperature Is High
C11, C13, C15, and C18 Industrial Engines
Exhaust System Contains Oil
C9.3 Engines for Caterpillar Built Machines
Crankcase Fumes Disposal Tube Has Oil Draining
C13, C15, and C18 Tier 4 Interim Engines
System Overview
C11, C13, C15, and C18 Industrial Engines
General Information
C13 Engines for Caterpillar Built Machines
Air Cleaner - Remove and Install
C13, C15, and C18 Tier 4 Interim Engines
Fuel Consumption Is Excessive
C9.3 Engines for Caterpillar Built Machines
Fuel Filter Is Restricted
C15 and C18 Tier 4 Final Engines
Air Inlet and Exhaust System
C3.4B Industrial Engine
Cold Weather Starting
C9.3 Engines for Caterpillar Built Machines
Fuel Priming Pump - Remove and Install
2009/05/18
Turbocharger Compressor Wheel {1052, 1053}
C13, C15, and C18 Tier 4 Interim Engines
Component Location
D7E Track-Type Tractor Power Train
Track - Connect - SystemOne Track
C13, C15, and C18 Engines for Caterpillar Built Machines
Factory Passwords
C9.3 Engines for Caterpillar Built Machines
Electronic Service Tool Does Not Communicate
C9.3 Engines for Caterpillar Built Machines
Test ECM Mode
904H Compact Wheel Loader
Maintenance Interval Schedule
C9.3 Tier 4 Final Engines
Fuel System
C9.3 Tier 4 Final Engines
Air Inlet and Exhaust System
C9.3 Tier 4 Final Engines
Fuel Filter Base
C13, C15, and C18 Tier 4 Interim Engines
Diagnostic Trouble Codes
C13, C15, and C18 Tier 4 Interim Engines
Event Codes
2009/05/25
Correction to the Operation and Maintenance Manual , "Engine Air Filter Primary Element - Clean/Replace" {1054}