Air Cleaner - Remove and Install
`
C13 <BR>Engines for Caterpillar Built Machines
[KENR8150]
C13 Engines for Caterpillar Built Machines
Muffler - Remove and Install - Clean Emissions Module
C13 Engines for Caterpillar Built Machines
Nozzle Heater Harness - Remove and Install
AIR INLET AND EXHAUST SYSTEM
AIR CLEANER GP
C13 Engines for Caterpillar Built Machines
Air Cleaner - Remove and Install
1.1. Removal Procedure
2.1. Installation Procedure
- Remove cover (1), primary filter element (2), and secondary filter element (3) from air cleaner housing (4).
Show/hide table
Illustration 2 g01916073 - Attach a suitable lifting device to bracket (6) and air cleaner (4). The weight of bracket (6) and air cleaner (4) is approximately
43 kg (95 lb) . - Remove bolts (5).
Show/hide table
Illustration 3 g01916113 - Remove bolts (7). Remove bracket (6).
Show/hide table
Illustration 4 g01916041 - Remove bolts (9). Remove air filter housing (8) from bracket (6).
Show/hide table
| |
| Illustration 1 | g01916039 |
- Install air filter housing (8) in reverse order of removal.
- Tighten bolts (9) to a torque of
17 ± 2 N·m (150 ± 18 lb in) .
- Tighten bolts (9) to a torque of
Information System:
C13, C15, and C18 Tier 4 Interim Engines
Fuel Consumption Is Excessive
C9.3 Engines for Caterpillar Built Machines
Fuel Filter Is Restricted
C15 and C18 Tier 4 Final Engines
Air Inlet and Exhaust System
C3.4B Industrial Engine
Cold Weather Starting
C9.3 Engines for Caterpillar Built Machines
Fuel Priming Pump - Remove and Install
2009/05/18
Turbocharger Compressor Wheel {1052, 1053}
2009/06/01
Correction to System Operation Testing and Adjusting , "Piston Pump (Hydraulic Fan) Pressure - Test and Adjust" {5070}
2009/06/01
Correction to System Operation Testing and Adjusting , "Piston Pump (Hydraulic Fan) Pressure - Test and Adjust" {5070}
2009/06/01
Correction to System Operation Testing and Adjusting , "Hydraulic Fan System" {1386, 1387, 5050}
Oil Buildup on Remanufactured Cylinder Packs{1225}
2011/06/08
Managing Transmission Events {7610}
C13, C15, and C18 Tier 4 Interim Engines
Exhaust Has Black Smoke
C11, C13, C15, and C18 Industrial Engines
General Information
C13, C15, and C18 Tier 4 Interim Engines
System Overview
C9.3 Engines for Caterpillar Built Machines
Crankcase Fumes Disposal Tube Has Oil Draining
C11, C13, C15, and C18 Industrial Engines
Exhaust System Contains Oil
C13, C15, and C18 Tier 4 Interim Engines
Exhaust Temperature Is High
C13 Engine for Caterpillar Built Machines
Engine Control Module - Remove and Install
C13, C15, and C18 Tier 4 Interim Engines
Component Location
D7E Track-Type Tractor Power Train
Track - Connect - SystemOne Track
C13, C15, and C18 Engines for Caterpillar Built Machines
Factory Passwords
C9.3 Engines for Caterpillar Built Machines
Electronic Service Tool Does Not Communicate
C9.3 Engines for Caterpillar Built Machines
Test ECM Mode
904H Compact Wheel Loader
Maintenance Interval Schedule