C13 Engines for Caterpillar Built Machines Flame Detection Temperature Sensor - Remove and Install - Clean Emissions Module Caterpillar


Flame Detection Temperature Sensor - Remove and Install - Clean Emissions Module
`
1.1. Removal Procedure
2.1. Installation Procedure

Removal Procedure

Table 1
Required Tools 
Tool  Part Number  Part Description  Qty 
4C-5597  Anti-Seize Compound 


    Illustration 1g02329135

  1. Remove cable straps (2) and remove flame detection sensor (1).


    Illustration 2g02331096

  2. Remove cable straps (5). Disconnect harness assembly (4) from temperature sensor (3).


    Illustration 3g02331117

  3. Remove cable straps (6) and remove temperature sensor (7).

Installation Procedure

  1. Install the temperature sensor in reverse order.

    1. Apply Tooling (A) to the threads of flame detection temperature sensor (1) and temperature sensor (7). Tighten the sensors to a torque of 45 ± 5 N·m (33 ± 4 lb ft).

Information System:

D5R Track-Type Tractor Power Train Track Roller Frame
834H Wheel Dozer and 836H Landfill Compactor Machine Systems Push Arms and Blade - Install
834H Wheel Dozer and 836H Landfill Compactor Machine Systems Push Arms and Blade - Remove
C13 Engines for Caterpillar Built Machines Pressure Sensor (DPF) - Remove and Install - Differential Pressure, Clean Emissions Module
2009/06/29 New Hardware is Available for Certain Wheel Tractor-Scrapers Draft Frames {6204, 7000, 7960}
C15 and C18 Industrial Engines Nozzle Heater Harness - Remove and Install
C13 Engines for Caterpillar Built Machines Fuel Manifold (ARD) - Remove and Install - Clean Emissions Module
C13 Engines for Caterpillar Built Machines Air Control Valve - Remove and Install - ARD Combustion, Clean Emissions Module
Procedure to Align the Dial on the Fuel Sender{1273, 7481, 7857}
D7E Track-Type Tractor Power Train Track Roller Frame - Remove and Install
AccuGrade</SUP> GPS / Single UTS / Site and Laser Reference v11 for Excavators Universal Total Station - MT900
C13 Engines for Caterpillar Built Machines Combustion Head - Remove and Install - Clean Emissions Module
C13 Engines for Caterpillar Built Machines Diesel Particulate Filter - Remove and Install - Clean Emissions Module
D6T Track-Type Tractor Hydraulic System Pressure Taps
C13 Engines for Caterpillar Built Machines Catalyst - Remove and Install - Diesel Oxidation Catalyst, Clean Emissions Module
Installation and Removal of the V-PAT Bulldozer{6050, 6079}
C13 Engines for Caterpillar Built Machines Temperature Sensor (DPF) - Remove and Install - Clean Emissions Module
Oversized Injector Sleeves for Remanufactured Cylinder Heads On Medium Sized Engines{1100, 1101, 1125}
Installation of Ripper (3TP){6310}
2009/10/29 A New Bowl for the Fuel/Water Separator Is Used {1261, 1263}
Improved Method for Installing the Actual Gear Position Sensor {1439, 3061}
2009/05/04 Improved Installation Procedure for the Heater Cable {7304}
C9.3 Engines for Caterpillar Built Machines Exhaust Manifold - Remove and Install
C13 Engines for Caterpillar Built Machines Muffler - Remove and Install - Clean Emissions Module