Equalizer Bar - Install
`
D6K Track-Type Tractor Power Train
[KENR5150]
D6K Track-Type Tractor Power Train
Equalizer Bar - Remove
D6K Track-Type Tractor Power Train
Track Carrier Roller - Remove
UNDERCARRIAGE
BAR GP-EQUALIZER
D6K Track-Type Tractor Power Train
Equalizer Bar - Remove
D6K Track-Type Tractor Power Train
Equalizer Bar - Install
1.1. Installation Procedure
Show/hide table
| Required Tools | |||
| Tools | Part Number | Part Description | Qty |
| E | 3S-6224 | Electric Hydraulic Pump Gp | 1 |
| 4C-9633 | Puller Stud | 1 | |
| 5P-2145 | Bearing Puller Adapter | 1 | |
| 6V-3160 | Double Acting Cylinder | 1 | |
| F | 3S-6224 | Electric Hydraulic Pump Gp | 1 |
| 4C-9634 | Puller Stud | 1 | |
| 6V-3175 | Double Acting Cylinder | 1 | |
| 9U-5337 | Bearing Puller Adapter | 1 | |
- Use Tooling (E) to install bearing (11).
Show/hide table
Illustration 2 g01358179 - Install seals (10).
Show/hide table
Illustration 3 g01358176 - Install spacer (9).
Show/hide table
Illustration 4 g01358207 - Use Tooling (F) to install bearing (8).
Show/hide table
Illustration 5 g01358158 - Install retaining rings (7). Install seals (6).
Show/hide table
Illustration 6 g01358146 - Use a suitable lifting device to install equalizer bar (5) on the machine. The weight of equalizer bar (5) is approximately
161 kg (355 lb) . - Remove the suitable lifting device.
Show/hide table
Illustration 7 g01358234 - Install pin (4).
Show/hide table
Illustration 8 g01357851 - Install the spacer and cover (3).
Show/hide table
Illustration 9 g01357807 - Install pin (2).
Show/hide table
Illustration 10 g01357803 - Install cover assembly (1).
Show/hide table
| |
| Illustration 1 | g01358199 |
End By:
- Install bottom guards. Refer to Disassembly and Assembly, "Bottom Guard - Install".
- Install the left side track roller frame. Refer to Disassembly and Assembly, "Track Roller Frame - Install".
Information System:
D3K, D4K and D5K Track-Type Tractors Power Train
Piston Pump (Hydrostatic) - Disassemble - Left Side
D3K, D4K and D5K Track-Type Tractors Power Train
Piston Pump (Hydrostatic) - Assemble - Left Side
D3K, D4K and D5K Track-Type Tractors Power Train
Piston Pump (Hydrostatic) - Disassemble - Right Side
D3K, D4K and D5K Track-Type Tractors Power Train
Piston Pump (Hydrostatic) - Assemble - Right Side
C4.4 (Mech) Industrial Engine
Fuel Injection Nozzles - Test/Exchange
994F Wheel Loader Power Train
Parking Brake - Disassemble
AD55B Underground Articulated Truck Power Train Electronic Control System
MID 027 - CID 0562 - FMI 09
AD55B Underground Articulated Truck Power Train Electronic Control System
MID 027 - CID 0562 - FMI 02
2007/03/12
New Software for the Engine ECM is Now Available {1902, 7620}
IT38H Integrated Toolcarrier and 938H Wheel Loader Power Train
Axle Housing (Short) - Remove
994F Wheel Loader Power Train
Transmission Planetary - Disassemble
D7E Track-Type Tractor Power Train Systems
General Information (Power Train)
994F Wheel Loader Power Train
Torque Converter (Lockup) - Assemble
993K Wheel Loader Electrohydraulic System
Access Platform (Operator Lift)
993K Wheel Loader Electrohydraulic System
Tilt Cylinder
D3K, D4K and D5K Track-Type Tractors Machine Systems
Gear Pump (Implement) - Remove
D3K, D4K and D5K Track-Type Tractors Machine Systems
Gear Pump (Implement) - Install
953D, 963D and 973D Track-Type Loaders
Using the Operator Monitor to Determine Diagnostic Codes
D3K, D4K and D5K Track-Type Tractors Machine Systems
Hydraulic Control Support - Remove and Install
D3K, D4K and D5K Track-Type Tractors Winch Systems
Valve Assembly - Remove
D3K, D4K and D5K Track-Type Tractors Winch Systems
Valve Assembly - Install
C4.4 and C6.6 Engines for Caterpillar Built Machines
Event Codes
993K Wheel Loader Electrohydraulic System
Bucket Control
D3K, D4K and D5K Track-Type Tractors Machine Systems
Hydraulic Control Support - Disassemble