Connector Contact Description
`
953D, 963D and 973D Track-Type Loaders Monitoring System
[KENR6326]
953D, 963D and 973D Track-Type Loaders Monitoring System
Menus (Messenger)
953D, 963D and 973D Track-Type Loaders Monitoring System
Input Components
OPERATOR STATION
MONITOR GP
953D, 963D and 973D Track-Type Loaders Monitoring System
Warning Operation
953D, 963D and 973D Track-Type Loaders Monitoring System
Monitoring System
953D, 963D and 973D Track-Type Loaders Monitoring System
Display Module
953D, 963D and 973D Track-Type Loaders Monitoring System
Menu Navigation
953D, 963D and 973D Track-Type Loaders Monitoring System
Menus (Messenger)
953D, 963D and 973D Track-Type Loaders Monitoring System
Connector Contact Description
953D, 963D and 973D Track-Type Loaders Monitoring System
Input Components
1.1. Instrument Cluster Connector
2.1. Messenger Connector
For wire numbers and information on the connectors, refer to the Testing and Adjusting, "System Schematic" Section of this manual or refer to the Electrical System Schematic for your machine model.
Instrument Cluster Connector
Show/hide table
 | |
| Illustration 1 | g01353144 |
Rear view of the instrument cluster | |
Table 1 refers to the pin numbers and the signal for each pin on the connector of the instrument cluster.
Show/hide table
| CIC 24 Pin Connector | |
|---|---|
| Signal | Pin Number |
| + Battery | 1 |
| - Battery | 2 |
| Chassis Ground | 3 |
| STB-Location 13 | 4 |
| Reserved | 5 |
| Not Used | 6 |
| Not Used | 7 |
| Not Used | 8 |
| Not Used | 9 |
| STB-Location 1 | 10 |
| STB-Location 18 | 11 |
| STB-Generic Input #1 | 12 |
| Not Used | 13 |
| Not Used | 14 |
| STB-Location 14 | 15 |
| STB-Dimming Control | 16 |
| STB-Generic Input #3 | 17 |
| STB-Generic Input #4 | 18 |
| CAN J1939-High | 19 |
| CAN J1939-Low | 20 |
| CAN J1939-Shield | 21 |
| STB-Generic Input #2 | 22 |
| Horn Driver Output | 23 |
| Keyswitch Input | 24 |
Messenger Connector
Show/hide table
 | |
| Illustration 2 | g01330564 |
Rear view of the Messenger Display | |
Table 2 refers to the pin numbers and the signal for each pin on the Messenger connector.
Show/hide table
| Messenger 8 Pin Connector | |
| Signal | Pin Number |
| Battery + | 1 |
| Ground | 2 |
| Key Switch | 3 |
| Dimmer-PWM Input | 4 |
| CDL or ATA+ | 5 |
| CDL or ATA- | 6 |
| CAN/J1939 High | 7 |
| CAN/J1939 Low | 8 |
Information System:
953D, 963D and 973D Track-Type Loaders
MID 039 - CID 0358 - FMI 06
953D, 963D and 973D Track-Type Loaders
MID 039 - CID 0358 - FMI 05
953D, 963D and 973D Track-Type Loaders
MID 039 - CID 0358 - FMI 03
953D, 963D and 973D Track-Type Loaders
MID 039 - CID 0357 - FMI 06
953D, 963D and 973D Track-Type Loaders
MID 039 - CID 0357 - FMI 05
953D, 963D and 973D Track-Type Loaders
MID 039 - CID 0357 - FMI 03
953D, 963D and 973D Track-Type Loaders
MID 039 - CID 0356 - FMI 06
953D, 963D and 973D Track-Type Loaders
MID 039 - CID 0356 - FMI 05
953D, 963D and 973D Track-Type Loaders
MID 039 - CID 0356 - FMI 03
953D, 963D and 973D Track-Type Loaders
MID 039 - CID 0355 - FMI 06
953D, 963D and 973D Track-Type Loaders
MID 039 - CID 0355 - FMI 05
953D, 963D and 973D Track-Type Loaders
MID 039 - CID 0355 - FMI 03
IT38H Integrated Toolcarrier and 938H Wheel Loader Power Train
Transmission Oil Pump - Disassemble
953D Track-Type Loader Power Train
Location of Electrical Components
Installation of No. 6 Ripper 1EH on D6T Track-Type Tractors{6310}
953D Track-Type Loader Power Train
Electrical Input Components
953D Track-Type Loader Power Train
Electrical Output Components
973K Track-Type Loader Systems
Calibration
D3K, D4K and D5K Track-Type Tractors Engine Supplement
Radiator Guard, Radiator, and Oil Cooler - Remove
953D, 963D and 973D Track-Type Loaders
MID 039 - CID 0444 - FMI 03
953D, 963D and 973D Track-Type Loaders
MID 039 - CID 0444 - FMI 05
953D, 963D and 973D Track-Type Loaders
MID 039 - CID 0444 - FMI 06
MS990C Part Number 291-1913 Receivers used on Computer Aided Earthmoving Systems (CAES), and AccuGrade Systems{7010}
953D, 963D and 973D Track-Type Loaders
MID 039 - CID 0888 - FMI 03