 | |
| Illustration 1 | g01001135 |
Directional turn signal and hazard flasher circuit | |
The components of the directional turn signal and hazard flasher circuit are the directional turn signal/hazard light switch, the right park/turn light, the left park/turn light, the left turn light, the right turn light, the left turn indicator, the right turn indicator, and the flasher.
 | |
| Illustration 2 | g00995556 |
(1) Directional turn signal/hazard light switch | |
 | |
| Illustration 3 | g00995558 |
Front view of machine (2) Right park/turn light (3) Left park/turn light | |
 | |
| Illustration 4 | g00995559 |
Rear view of machine (4) Left turn light (5) Right turn light | |
 | |
| Illustration 5 | g00995562 |
Dash panel (6) Left turn indicator (7) Right turn indicator | |
 | |
| Illustration 6 | g00995564 |
Front view of cab (front cover plate removed) (8) Flasher | |
With the key start switch in the ON position, 24 volt power is supplied from the batteries via circuit breaker #4 through the flasher to the directional turn signal/hazard light switch.
Directional turn signal/hazard light switch (1) controls 24 volt power to left park/turn light (3), left turn light (4), right park/turn light (2), and to right turn light (5). With the directional turn signal/hazard light switch in the DOWN position, the left park/turn light and the left turn light flash together. Left turn indicator (6) will also flash. With the directional turn signal/hazard light switch in the UP position, the right park/turn light and the right turn light flash together. Right turn indicator (7) will also flash. The flash rate is controlled by flasher (8) and can not be changed.
The hazard lights are used as a warning device. With the directional turn signal/hazard light switch in the ON position, 24 volt power is supplied to both the left turn lights and the right turn lights. Both the left turn lights and the right turn lights flash together. The flash rate can not be changed.