D7 Track-Type Tractors Information Display Service Test Menu Caterpillar

Service Tests

Menu > Service > Service Tests

Note: In order for this test to be accessed, the Service Mode must be activated. Refer to "Service Menu" for more information.

Illustration 1	g06595707
Service Page (1) Page Identification (2) Back button (3) Scroll Bar (4) Home button (5) "Service Tests" menu button

1. Press the "Service Test" menu button. The "Service Tests" page will appear.
   Show/hide table

   Illustration 2	g06595708
   Service Tests Page (1) Page Identification (2) Back button (4) Home button (6) Service Tests button group

2. Press the intended button on the button group. The related service test page will appear.

Example: Torque Converter Stall Test

Show/hide table

Illustration 3	g06595709
Torque Converter Stall Test Page (1) Page Identification (2) Back button (4) Home button (7) "OK" button

1. Begin by reading the Instructions and Warnings text. When done, press the "OK" button (7) to continue the service test.
   Show/hide table

   Illustration 4	g06595709
   Torque Converter Stall Test Page (1) Page Identification (2) Back button (4) Home button (7) "OK" button

2. Press the "OK" button (7) to continue

   Press the Back button (2) to return to the previous page.

   Show/hide table

   Illustration 5	g06595712
   Torque Converter Stall Test Page (1) Page Identification (8) Abort button (9) Next button

3. Continue to follow the instructions.

   To abort the test at any time, press the Abort button (8).

4. Press the Next button (9) to continue with the calibration.
   Show/hide table

   Illustration 6	g06595716
   Torque Converter Stall Test Page (1) Page Identification (7) "OK" button

5. Press the "OK" button (7) if the calibration was successful.

Illustration 7	g06595718
Torque Converter Stall Test Page (1) Page Identification (10) Dialog Box (11) Cancel button (12) "OK" button

If the Abort button (8) has been pressed, a Dialog Box (10) will appear asking the operator if the operator wants to continue aborting the calibration. If so, press the "OK" button (12). If not, press the Cancel button (11).

Illustration 8	g06595721
Torque Converter Stall Test Page (7) "OK" button

If the calibration was unsuccessful and was aborted by either the calibration tool or by the monitor (operator) pressing the Abort button (8), press the "OK" button (7).