D7 Track-Type Tractors Information Display System Information Menu Caterpillar

Inform

Menu > Navigation Tray > Inform

Illustration 1	g06594573
Performance Page and the Navigation Tray (1) Menu button (2) Close button (3) Feature tile row (4) "Inform" tab

The Feature Tile Row (3) allows the operator to navigate to the "Inform" tab (4).

1. Press the Menu button (1) on the Performance Page. The Navigation Tray will appear.

2. Press the "Inform" tab (4) in the Feature Tile Row (3) to access the Service page and view the Menu Navigation buttons.
   Show/hide table

   Illustration 2	g06594585
   Inform Page (5) Page Identification (6) Back button (7) Home button (8) Totals menu button (9) Key Features menu button

3. Press the intended menu button in the menu button group. The intended menu page will appear.

Key Features

Menu > Navigation Tray > Inform > Key Features

Show/hide table

Illustration 3	g06594623
Inform Page (1) Page Identification (2) Back button (3) Home button (4) "Totals" menu button (5) "Key Features" menu button

1. Press the "Key Features" menu button (5). The Key Features menu page will appear.
   Show/hide table

   Illustration 4	g06584051
   Key Features Page (1) Page Identification (2) Back button (3) Home button (6) Scroll Bar (7) Key Features menu button group

   Show/hide table

   Illustration 5	g06584054
   Key Features Page (1) Page Identification (2) Back button (3) Home button (6) Scroll Bar (7) Key Features menu button group

2. Press the intended menu button in the "Key Features" menu button group (7). The intended key feature page will appear.

   The "Key Features" menu button group (7) will consist of seven menu buttons:

   • "Autoshift"

   • "Traction Control"

   • "Slope Assist"

   • "Reversing Fan"

   • "Stable Blade"

   • "AutoCarry"

   • "Blade Load Monitor"

   Each menu page will consist of subpages that will provide the operator with information and suggestions on operating the specific feature.

Example: Autoshift

Menu > Navigation Tray > Inform > Key Features > Autoshift

Show/hide table

Illustration 6	g06594593
Key Features Page (1) Page Identification (2) Back button (3) Home button (8) "Autoshift" menu button

1. Press the "Autoshift" menu button (8). The "Autoshift" key feature page will appear.
   Show/hide table

   Illustration 7	g06594595
   Overview Page (1) Page Identification (2) Back button (3) Home button (9) Next button

2. Carefully read the text on the "Overview" page. When done, press the Next button (9) to proceed to the next page.

   Note: The operator should follow the suggestions on the Operating Tip pages. Following these tips should provide optimum performance of the machine and the machine functions.

Illustration 8	g06594601
Operating Tip page (Example: 1/5) (1) Page Identification (2) Back button (3) Home button (10) Up Arrow button (11) Down Arrow button (12) Operating Tip page counter (Example: 1/5 = Page 1 of a total of 5 pages)

Illustration 9	g06594619
Operating Tip page (Example: 5/5) (1) Page Identification (2) Back button (3) Home button (9) Up Arrow button (10) Down Arrow button (11) Operating Tip page counter (Example: 5/5 = Page 1 of a total of 5 pages)

Note: With the "Operating Tip" page on page 1 of 5 pages, the Up Arrow button (9) is grayed out and is non-functioning. Begin scrolling through the 5 "Operating Tip" pages by pressing the Down Arrow button (10). Both the Up Arrow button (9) and the Down Arrow button (10) will be functioning from pages 2-4. On the last page (page 5/5), the Down Arrow button (10) is grayed out and is non-functioning.

Totals

Menu > Navigation Tray > Inform > Totals

The Totals page allows the operator to view the machine operation totals.

Show/hide table

Illustration 10	g06594623
Inform Page (1) Page Identification (2) Back button (3) Home button (4) "Totals" menu button (5) "Key Features" menu button

1. Press the "Totals" menu button (4). The Totals page will appear.

Illustration 11	g06594630
Totals Page (1) Page Identification (2) Back button (3) Home button (6) "Trip Totals" menu button (7) "Lifetime Totals" menu button

The Totals page contains the following two menu buttons:

• "Lifetime Totals"

• "Trip Totals"

Lifetime Totals

The Lifetime Totals page will display the following totals for the machine:

• Total Fuel Used

• Total Engine #1 Fuel

• Total Idle Fuel

• Total Engine Idle Time

• Average Fuel Consumption Rate

• Engine Lifetime Hours

• Total Forward Distance Traveled

• Total Reverse Distance Traveled

Illustration 12	g06594689
Totals Page (1) Page Identification (2) Back button (3) Home button (7) "Lifetime Totals" menu button

1. Press the "Lifetime Totals" menu button (7). The Lifetime Totals page will appear.
   Show/hide table

   Illustration 13	g06594692
   Lifetime Totals page (1) Page Identification (2) Back button (3) Home button

2. Press the Back button (2) to return to the previous page.

3. Press the Home button (3) to return to the Home Page (Performance Page).

Trip Totals

The Trip Totals page will display the following trip totals:

• Total Fuel Used

• Total Engine #1 Fuel

• Total Idle Fuel

• Total Engine Idle Time

• Average Fuel Consumption Rate

• Engine Lifetime Hours

• Total Forward Distance Traveled

• Total Reverse Distance Traveled

The Trip Totals feature is can be reset to document another task of the machine.

Illustration 14	g06594690
Totals Page (1) Page Identification (2) Back button (3) Home button (6) "Trip Totals" menu button

1. Press the "Trip Totals" menu button (6). The Trip Totals page will appear.
   Show/hide table

   Illustration 15	g06594695
   Trip Totals (1) Page Identification (2) Back button (3) Home button (8) Reset menu button

2. Press the Reset button (8). A dialog box will appear.
   Show/hide table

   Illustration 16	g06594696
   Reset Trip Totals? dialog box (9) Cancel button (10) OK button

3. Press the OK button (10) to reset the trip totals to zero. The procedure can be canceled by pressing the Cancel button (9).
   Show/hide table

   Illustration 17	g06594697
   Trip Totals page reset to zero (1) Page Identification (2) Back button (3) Home button

4. Press the Back button (2) to return to the previous page.

5. Press the Home button (4) to return to the Home Page (Performance Page).