Menu > Settings > Display
| |
| Illustration 1 | g06593665 |
|
Settings Page (1) Page Identification (2) Back button (3) Home Button (4) "Display" menu button | |
- Press the "Display" menu button (4) on the "Settings" page. The "Display" page will appear.
Show/hide table
Illustration 2 g06583795 Display Page
(1) Page Identification
(2) Back button
(3) Home Button
(5) Scroll Bar
(6) Toggle Switch
(7) Current Setting Status
(8) "Auto Night Mode" menu button
(9) "Clock Set" menu button
(10) "Units" menu button
(11) "Brightness" menu button
(12) "Language" menu buttonShow/hide table
Illustration 3 g06583786 Display Page
(1) Page Identification
(2) Back button
(3) Home Button
(5) Scroll Bar
(6) Toggle Switch
(7) Current Setting Status
(13) "Grade Control On/Off Grade Alarm" menu button
(14) "Grade Control Auto/Manual Mode Alarm" menu button
(15) "Grade Control Alert Volume" menu button
(16) "Camera In Reverse Only Mode" menu button
(17) "Camera Rear Reference Lines" menu buttonShow/hide table
Illustration 4 g06583965 Display Page
(1) Page Identification
(2) Back button
(3) Home Button
(5) Scroll Bar
(6) Toggle Switch
(7) Current Setting Status
(18) "Software License Info" menu button
(19) "Grade Offset Change Alarm" menu button - Scroll up and down the "Display" page by pressing the Up Arrow button or the Down Arrow button on the Scroll Bar (5). If the Up Arrow is not visible, the menu button list is at the top of the page. If the Down Arrow is not visible, the menu button list is at the bottom of the page.
- Press the intended Display Menu button (6) to navigate to the intended page.
Menu > Settings > Display > Language
| |
| Illustration 5 | g06593668 |
|
Display Page and Language Page (1) Page Identification (2) Scroll Bar (3) Back Button (4) Home button (5) Next Page Icon (6) Current Setting Status (7) "Language" menu button (8) Language Option (Radio) button group | |
- Press the "Language" menu button (7). The "Language" page will appear.
- Scroll up and down the "Language" page by pressing the Up Arrow button or the Down Arrow button on the Scroll Bar (2). If the Up Arrow is not visible, the menu button list is at the top of the page. If the Down Arrow is not visible, the menu button list is at the bottom of the page.
- Press the intended option button in the Language Option (Radio) button group (8). The selected button will have a white circle inside the button.
- Press the Back button (3) to return to the previous page, which will now be shown in the newly selected language.
Note: "English" is the default language.
- Press the Home button (4) to return to the Home Page (Performance Page).
Brightness Setting Day Mode/Night Mode Button
Menu > Settings > Display > Brightness
| |
| Illustration 6 | g06593794 |
|
Display Page (1) Page Identification (2) Scroll Bar (3) Back Button (4) Home button (5) Next Page Icon (6) "Brightness" menu button | |
- Press the "Brightness" menu button (6). The "Brightness" page will appear.
| |
| Illustration 7 | g06596652 |
|
Brightness page (Day Mode) and Brightness page (Night Mode) (1) Page Identification (3) Back Button (4) Home button (7) Day Mode/Night Mode button (8) Increment/Decrement bar | |
Adjusting the Brightness Setting
Decrease the brightness setting by pressing the Minus (-) button of the Increment/Decrement bar (8).
Increase the brightness setting by pressing the Plus (+) button of the Increment/Decrement bar (8).
Adjusting the Day Mode/Night Mode Setting
Pressing the Day Mode/Night Mode button (7) will change the display from day mode to night mode. Press the Back button (3) to return to the previous page. Press the Home button (4) to return to the Home Page (Performance Page).
Note: Turning the cab lights on or off will automatically toggle the display screen between day mode and night mode. This feature occurs when the Auto Night Mode feature is either enabled or disabled.
Note: The Day Mode/Night Mode button (7) will still allow for either setting to be toggled and active whether the Auto Night Mode toggle switch has been enabled or disabled.
For more information, refer to the "Auto Night Mode" section.
Menu > Settings > Display > Units
| |
| Illustration 8 | g06593807 |
|
Display Page and Units Page (1) Page Identification (2) Back Button (3) Scroll Bar (4) Home Button (5) Next Page Icon (6) Current Setting Status (Example: "Metric") (7) "Units" menu button (8) Option (Radio) button ("English") (9) Option (Radio) button ("Metric") | |
- Press the "Units" menu button (7). The "Units" page will appear.
- Press the intended option button in the Option (Radio) button group ("Metric" (8) ("English" (9)). The selected button will have a white circle inside.
- Press the Back button (2) to return to the previous page, which will now be shown in the newly selected unit.
Note: "English" is the default unit.
- Press the Home button (4) to return to the Home Page (Performance Page).
Menu > Settings > Display > Clock Set
| |
| Illustration 9 | g06593822 |
|
Display Page (1) Page Identification (2) Scroll Bar (3) Back button (4) Home Button (5) Next Page Icon (6) "Clock Set" menu button | |
- Press the "Clock Set" menu button (6). The "Clock Set" page will appear.
| |
| Illustration 10 | g06593842 |
|
Clock Set Page (1) Page Identification (3) Back button (4) Home Button (7) Numerical Increment/Decrement Bar (Minutes) (8) Toggle Switch (AM-PM) (9) Toggle Switch (12-24) (10) Numerical Increment/Decrement Bar (Hour) (11) Real-Time Clock (12-Hour mode) (12) Real-Time Clock (24-Hour mode) | |
Adjusting the Hours and Minutes Setting
Decrease the hours setting by pressing the Minus (-) button of the Hours Increment/Decrement bar.
Increase the hours setting by pressing the Plus (+) button of the Hours Increment/Decrement bar.
Decrease the minutes setting by pressing the Minus (-) button of the Minutes Increment/Decrement bar.
Increase the minutes setting by pressing the Plus (+) button of the Minutes Increment/Decrement bar.
Adjusting the 12 Hour/24 Hour Setting
Pressing the 12/24 hour Toggle Switch (9) will switch the clock between the 12-hour mode to the 24-hour mode.
Note: When the 12/24 hour Toggle Switch (9) is set to 24, the AM/PM Toggle Switch (8) will no longer be visible.
Pressing the AM/PM Toggle Switch (8) will switch the clock between the AM mode to the PM mode.
Note: When the 12/24 hour Toggle Switch (9) is set to 24, the AM/PM Toggle Switch (8) will no longer be visible.
Press the Back button (3) to return to the previous page. Press the Home button (4) to return to the Home Page (Performance Page).
Menu > Settings > Display > Auto Night Mode
| |
| Illustration 11 | g06593860 |
|
Display Page (1) Page Identification (2) Back button (3) Scroll Bar (4) Home Button (5) Toggle Switch (Off vs On) (6) Current Setting Status ("Disabled" vs "Enabled") (7) "Auto Night Mode" menu button | |
Turning the cab lights ON or OFF will automatically toggle the display screen between day mode and night mode. This feature occurs when the Auto Night Mode feature is either enabled or disabled.
- Press the Auto Night Mode Toggle Switch (5).
When the toggle switch is in the initial state OFF and is pressed, the toggle switch will be in the ON state when the left side of the switch is green and when the switch has moved to the right.
When the toggle switch is in the ON state and is pressed, the toggle switch will return to the initial state OFF when the switch has moved to the left and the right side of the switch is black.
The Current Setting Status (6) will change when the setting changes.
- Press the Home button (4) to return to the Home Page (Performance Page).
Note: The Day Mode/Night Mode button on the "Brightness" settings page will still allow for either setting to be toggled and active whether the Auto Night Mode toggle switch has been enabled or disabled.
For more information, refer to "Adjusting the Brightness Setting".
Menu > Settings > Display > Camera Rear Reference Lines
Note: The Rear Camera must be installed.
Note: The Rear Camera must be configured. Refer to the "Service Menu" section of this manual for more information.
| |
| Illustration 12 | g06593878 |
|
Display Page and Camera Page (1) Page Identification (2) Back button (3) Scroll Bar (4) Home Button (5) Current Setting Status ("Off") (6) "Camera Rear Reference Lines" menu button (7) Toggle Switch ("Off") | |
| |
| Illustration 13 | g06593892 |
|
Display Page and Camera Page (1) Page Identification (2) Back button (3) Scroll Bar (4) Home Button (5) Current Setting Status ("On") (6) "Camera Rear Reference Lines" menu button (7) Toggle Switch ("On") (8) Rear Camera Guides | |
Menu > Settings > Display > Camera In Reverse Only Mode
| |
| Illustration 14 | g06583988 |
|
Display Page (1) Page Identification (2) Back button (3) Scroll Bar (4) Home Button (5) Current Setting Status ("Disabled" vs "Enabled") (6) "Camera In Reverse Only Mode" menu button (7) Toggle Switch (Off vs On) | |
Press the Camera In Reverse Only Mode Toggle Switch (7).
When the Toggle Switch (7) is in the initial state OFF and is pressed, the Toggle Switch (7) will be in the ON state when the left side of the switch is green and when the switch has moved to the right.
When the Toggle Switch (7) is in the ON state and is pressed, the Toggle Switch (7) will return to the initial state OFF when the switch has moved to the left and the right side of the switch is black.
The Current Setting Status (5) will change when the setting changes.
| |
| Illustration 15 | g06593906 |
|
Performance Page | |
| |
| Illustration 16 | g06593910 |
|
Slope Assist Page | |
When enabled, the Camera In Reverse Only Mode will only show the rear camera screen when the machine is placed into reverse (R) gear. In any other gear, a blank space will appear where the camera screen is located.
Press the Back button (2) to return to the previous page. Press the Home button (4) to return to the Home Page (Performance Page).
Grade Control Alert Volume Setting
Menu > Settings > Display > Grade Control Alert Volume
| |
| Illustration 17 | g06593940 |
|
Display Page and Grade Control Alert Volume Page (1) Page Identification (2) Back button (3) Scroll Bar (4) Home Button (5) "Grade Control Alert Volume" menu button (6) Current Setting Status (Example: "Medium") (7) Option (Radio) button (High) (8) Option (Radio) button (Medium) (Example: Enabled) (9) Option (Radio) button (Low) (10) Option (Radio) button (Off) | |
The Grade Control Volume Setting can be set to the following choices:
- "Off": No audible tone
- "Low"
- "Medium"
- "High"
- Press the "Grade Control Alert Volume" menu button (5). The "Grade Control Alert Volume" page will appear.
- Press the intended option button in the Option (Radio) button group. The selected button will have a white circle inside.
- Press the Back button (2) to return to the previous page, which will now be shown in the Current Setting Status (6) field of the "Grade Control Alert Volume Setting" menu button (5).
Note: "Off" is the default setting.
- Press the Home button (4) to return to the Home Page (Performance Page).
Grade Control Auto/Manual Mode Alarm
Menu > Settings > Display > Grade Control Auto/Manual Mode Alarm
| |
| Illustration 18 | g06584022 |
|
Display Page (1) Page Identification (2) Back button (3) Scroll Bar (4) Home Button (5) Current Setting Status ("Disabled" vs "Enabled") (6) "Grade Control Auto/Manual Mode Alarm" menu button (7) Toggle Switch (Off vs On) | |
Press the "Grade Control Auto/Manual Mode Alarm" Toggle Switch (7).
When the Toggle Switch (7) is in the initial state ON and is pressed, the Toggle Switch (7) will be in the OFF state when the right side of the switch is black and when the switch has moved to the left.
When the Toggle Switch (7) is in the OFF state and is pressed, the Toggle Switch (7) will return to the initial state ON when the switch has moved to the right and the left side of the switch is green.
The Current Setting Status (5) will change when the setting changes.
Grade Control On/Off Grade Alarm
Menu > Settings > Display > Grade Control On/Off Grade Alarm
| |
| Illustration 19 | g06584025 |
|
Display Page (1) Page Identification (2) Back button (3) Scroll Bar (4) Home Button (5) Current Setting Status ("Disabled" vs "Enabled") (6) "Grade Control Auto/Manual Mode Alarm" menu button (7) Toggle Switch (Off vs On) | |
Press the "Grade Control On/Off Grade Alarm" Toggle Switch (7).
When the Toggle Switch (7) is in the initial state OFF and is pressed, the Toggle Switch (7) will be in the ON state when the left side of the switch is green and when the switch has moved to the right.
When the Toggle Switch (7) is in the ON state and is pressed, the Toggle Switch (7) will return to the initial state OFF when the switch has moved to the left and the right side of the switch is black.
The Current Setting Status (5) will change when the setting changes.
Menu > Settings > Display > Grade Offset Change Alarm
| |
| Illustration 20 | g06584029 |
|
Display Page (1) Page Identification (2) Back button (3) Scroll Bar (4) Home Button (5) Current Setting Status ("Disabled" vs "Enabled") (6) "Grade Control Auto/Manual Mode Alarm" menu button (7) Toggle Switch (Off vs On) | |
Press the "Grade Offset Change Alarm" Toggle Switch (7).
When the Toggle Switch (7) is in the initial state OFF and is pressed, the Toggle Switch (7) will be in the ON state when the left side of the switch is green and when the switch has moved to the right.
When the Toggle Switch (7) is in the ON state and is pressed, the Toggle Switch (7) will return to the initial state OFF when the switch has moved to the left and the right side of the switch is black.
The Current Setting Status (5) will change when the setting changes.
Menu > Settings > Display > Software License Info
| |
| Illustration 21 | g06584046 |
|
Display Page (1) Page Identification (2) Back button (3) Scroll Bar (4) Home Button (5) "Software License Info" menu button | |
If the "Software License Info" menu button (5) is not visible on the "Display" page, scroll up and down the "Display" page by pressing the Up Arrow button or the Down Arrow button on the Scroll Bar (3). If the Up Arrow is not visible, the menu button list is at the top of the page. If the Down Arrow is not visible, the menu button list is at the bottom of the page.
- Press the "Software License Info" menu button (5). The "Software License Info" page will appear.
Show/hide table
Illustration 22 g06593948 Software License Info Page
(1) Page Identification
(2) Back button
(3) Scroll Bar
(4) Home Button - Use the Scroll Bar (3) to scroll up and down the "Software License Info" page. Scroll up and down the page by pressing the Up Arrow button or the Down Arrow button on the Scroll Bar (3). If the Up Arrow is not visible, the menu button list is at the top of the page. If the Down Arrow is not visible, the menu button list is at the bottom of the page.
- Take the time to read the "END USER LICENSE AGREEMENT".
- Press the Back button (2) to return to the previous page. Press the Home button (4) to return to the Home Page (Performance Page).
