950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Location of Components (Fan Hydraulic System) Caterpillar


Location of Components (Fan Hydraulic System)
`
1.1. Components of the Fan Hydraulic System
2.2. Fan
3.2. Hydraulic Fan Motor
4.2. Brake/Fan Pump
5.2. Brake/Fan Combination Valve
6.2. Hydraulic Tank
7.2. Hydraulic Oil Cooler
8.2. Hydraulic Oil Cooler Bypass Valve
9.2. Engine ECM
10.2. Implement ECM
11.2. Brake/Fan Kidney Loop Oil Filter
12.2. Demand Fan Solenoid

Components of the Fan Hydraulic System

  • Fan

  • Hydraulic Fan Motor

  • Brake/Fan Pump

  • Brake/Fan Combination Valve

  • Hydraulic Tank

  • Hydraulic Oil Cooler

  • Hydraulic Oil Cooler Bypass Valve

  • Engine ECM

  • Implement ECM

  • Brake/Fan Kidney Oil Filter

  • Demand Fan Solenoid

Fan



Illustration 1g03723630

Fan is attached to the fan motor directly in front of the radiator

Hydraulic Fan Motor



Illustration 2g03723603

Hydraulic fan motor is located just in front of the radiator next to the engine.

Brake/Fan Pump



Illustration 3g03661894

The brake/fan pump is located inside the engine compartment on the right rear of machine, behind the right rear tire.

Brake/Fan Combination Valve



Illustration 4g03723869

The brake/fan combination valve is located on the right side of the machine inside the service compartment.

Hydraulic Tank



Illustration 5g03723598

The hydraulic tank is located behind the operator station of the machine.

Hydraulic Oil Cooler



Illustration 6g03723609

The hydraulic oil cooler is located in the rear of the machine inside the back grill.

Hydraulic Oil Cooler Bypass Valve



Illustration 7g03723672

The hydraulic oil cooler bypass valve is located in the rear of the machine inside the left-hand cover

Engine ECM



Illustration 8g03723754

The Engine ECM is located on the right side of the machine mounted to the side of the engine.

Implement ECM



Illustration 9g03651183

The implement ECM is located behind the operators seat on the right-hand side of the machine.

Brake/Fan Kidney Loop Oil Filter



Illustration 10g03661884

The brake/fan kidney loop oil filter is located on the right side of the machine inside the service compartment.

Demand Fan Solenoid



Illustration 11g03566817

The demand fan solenoid is located on the brake/fan combination valve.

Information System:

826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Machine Systems Piston Pump (Steering) - Remove and Install
D3K2, D4K2 and D5K2 Track-Type Tractors Systems Switch Circuits - Test
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Electrohydraulic Control
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Machine Systems Hydraulic Tank - Assemble
C3.4B Engines ECM Memory - Test
Inspect the Alternate Exit on Certain Underground Articulated Trucks and Load Haul Dump Machines{7310}
D4, D6K2 and D6K Track-Type Tractor Systems Power Train System
631K and 637K Wheel Tractor-Scraper Systems Relief Valve (Scraper Bowl) - Test and Adjust
D7E Track-Type Tractor Systems HVAC System
2014/11/27 An Improved Blower Assembly in the Air Conditioner Group Is Now Used on Certain Wheel Loaders {7320}
631K and 637K Wheel Tractor-Scraper Systems Steering System Pressure - Test and Adjust
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Machine Systems Hydraulic Tank - Disassemble
D7E Track-Type Tractor Systems Electronic Control (HVAC System)
Procedure for Installing Retrofit Radar Holder for Cat Object Detection Systems {7347, 7605}
Installation Procedure for Mounting the Rear Radar On Certain Cat Products{7347, 7605}
C3.4B Engines Electrical Power Supply - Test
3516E Generator Set Engine Aftercooler - Two Stage Aftercooler
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Drive Shaft
C4.4 Industrial Engine Severe Service Application
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Machine Systems Main Control Valve - Remove and Install
950M and 962M Wheel Loaders Hydraulic System Oil Filters - Replace
Guard Rail Installation Procedure for D11T Track-Type Tractors{7150, 7256}
D7E Track-Type Tractor Systems Location of Components (HVAC System)
631K and 637K Wheel Tractor-Scraper Systems Calibration Procedures