| |
| Illustration 1 | g03362842 |
|
Monitoring system display | |
The monitoring system (1) is located in the operator console.
Reference: Refer to the Monitoring System Systems Operations for your machine for additional information.
Control Manifold (Hydraulic Fan)
| |
| Illustration 2 | g03360278 |
|
View of the control manifold as seen from below the machine. | |
The control manifold (2) is located on the right side of the machine. The control manifold (2) is above a belly guard and in front of the front axle. This manifold is the same manifold that is used for the brake system.
Control Manifold (Hydraulic Fan)
| |
| Illustration 3 | g03418854 |
| (2) Hydraulic fan and brake control manifold | |
The hydraulic fan solenoid gp is located on the brake and hydraulic control manifold (2)
| |
| Illustration 4 | g03349263 |
|
The rear of the machine as seen from a higher vantage point (4) Piston pump | |
The piston pump (4) is connected to an output shaft of the transmission.
| |
| Illustration 5 | g03351173 |
|
The rear of the machine as seen from a higher vantage point (3) Pump control valve (4) Piston pump | |
The pump control valve (5) is located on the side of the piston pump (4).
| |
| Illustration 6 | g03418131 |
|
View of the rear of the tractor | |
The filter for the hydraulic fan system is located on the rear of the tractor. The temperature sensor is located on the top of the filter.
| |
| Illustration 7 | g03418189 |
|
View of the fan motor | |
The piston motor (hydraulic fan) (5) is part of the cooling group. The piston motor (hydraulic fan) (5) is located on the rear of the cooling package. The speed sensor is located on the right side of the piston motor
| |
| Illustration 8 | g03351198 |
|
Hydraulic system oil cooler | |
Oil cooler (brake and hydraulic fan) (6) is located in front of the radiator group. Oil flows from the piston motor (hydraulic fan) through the cooler. The oil flows through the return filter and into the hydraulic tank.