| |
| Illustration 1 | g03715908 |
The motor is mounted to the brake behind the cover, located on the winch case.
Reference: Refer to Systems Operation, UENR4089, "Piston Motor" for additional information.
Winch Displacement Control Valve
| |
| Illustration 2 | g03715936 |
The displacement control valve is located on the winch motor behind the cover.
Reference: Refer to Systems Operation, UENR4089, "Winch Displacement Control Valve" for additional information.
| |
| Illustration 3 | g03715946 |
The winch logic valve is located on the winch motor behind the cover.
Reference: Refer to Systems Operation, UENR4089, "Winch Operation" for additional information.
| |
| Illustration 4 | g03715958 |
The implement ECM is located on the machine right side, in the rear access panel.
Reference: Refer to Systems Operation, UENR4089, "Electronic Control (Winch System)" for additional information.
| |
| Illustration 5 | g03730976 |
|
(5) Winch pump
(6) Winch charge pump | |
The winch pumps are mounted to the back of the hystat pump.
Reference: Refer to Systems Operation, UENR4089, "Piston Pump" for additional information.
| |
| Illustration 6 | g03715966 |
The winch control lever is located to the right of the operators seat.
Reference: Refer to Operation and Maintenance Manual, SEBU9226 for additional information.
| |
| Illustration 7 | g03715968 |
The winch drive away switch is located to the right of the operator seat.
Reference: Refer to Operation and Maintenance Manual, SEBU9226 for additional information.
| |
| Illustration 8 | g03715989 |
The winch free spool switch is located to the right of the operators seat.
Reference: Refer to Operation and Maintenance Manual, SEBU9226 for additional information.