Diagram of the Monitoring System
 | |
| Illustration 1 | g01364330 |
Monitoring system | |
Instrument Cluster
 | |
| Illustration 2 | g01359665 |
Instrument cluster | |
The Instrument Cluster display is located in the top of the center dash panel.
The instrument cluster monitors the operation of the machine. The instrument cluster displays information in the following four ways:
- Four gauges
- Fifteen visual indicators
- One audio Action Alarm
- One LCD screen
For details, see the System Operation, "Display Module" section of this manual.
Messenger
The Messenger is an on-board monitoring system that displays machine operating information and allows the operator to adjust the machine settings in order to fit a particular application.
The Messenger provides the following information:
- Operating Characteristics of the Machine
- Diagnostics
- Service Intervals
- Warning Events
- Modes of Machine Operation
- Lifetime Totals
The Messenger enables the following:
- Adjust Machine Settings
- Recall Operator Preferred Machine Settings
- Recall Totals for a particular Job and/or Operator
When the engine key start switch is turned on, the Messenger will display the operating status of all the following:
- Sensors
- Electronic Control Modules (ECM)
- System components for the monitor
See this System Operation, "Display Module" for details.
Data Link
For details, see the System Operation, "Data Link" Section of this manual.