TH220B, TH330B and TH340B Telehandlers Machine Systems Transmission Caterpillar


Transmission
`



Illustration 1g01000938

(1) Torque for the plug ... 24 ± 3.5 N·m (17 ± 3 lb ft)

(2) Torque for the 2 bolts ... 25 ± 6.5 N·m (18 ± 5 lb ft)

(3) Torque for the bolt ... 78 ± 10 N·m (57 ± 7 lb ft)

(4) Torque for the plugs ... 24 ± 3.5 N·m (17 ± 3 lb ft)

(5) Torque for the torque converter inlet relief valve ... 27 ± 3.5 N·m (20 ± 3 lb ft)

(6) Torque for the pressure regulator ... 55 ± 9.5 N·m (40 ± 7 lb ft)

(7) Torque for the sensor ... 47 ± 7 N·m (35 ± 5 lb ft)

(8) Torque for the 4 bolts ... 25 ± 6.5 N·m (18 ± 5 lb ft)

(9) Torque for the 7 bolts ... 25 ± 6.5 N·m (18 ± 5 lb ft)

(10) Torque for the 6 bolts ... 55 ± 9.5 N·m (40 ± 7 lb ft)

(11) Torque for the 2 bolts ... 25 ± 6 N·m (19 ± 4 lb ft)

(12) Torque for the bolts ... 55 ± 9.5 N·m (40 ± 7 lb ft)

(13) Torque for the 3 bolts ... 25 ± 6.5 N·m (18 ± 5 lb ft)

(14) Torque for the 2 bolts ... 25 ± 6.5 N·m (18 ± 5 lb ft)

(15) Torque for the sensor ... 47 ± 7 N·m (35 ± 5 lb ft)

(16) Torque for the 3 bolts ... 25 ± 6.5 N·m (18 ± 5 lb ft)

(17) Torque for the 2 bolts ... 25 ± 6.5 N·m (18 ± 5 lb ft)

(18) Torque for the bolt ... 55 ± 9.5 N·m (40 ± 7 lb ft)

(19) Torque for the 2 bolts ... 78 ± 10 N·m (58 ± 7 lb ft)

(20) Torque for the plug ... 24 ± 3.5 N·m (17 ± 3 lb ft)

(21) Torque for the 2 bolts ... 25 ± 6.5 N·m (18 ± 5 lb ft)

(22) Torque for the plug ... 44 ± 10 N·m (32 ± 7 lb ft)

(23) Torque for the bolts ... 25 ± 6.5 N·m (18 ± 5 lb ft)

(24) Torque for the bolts ... 9 ± 1.5 N·m (6 ± 1 lb ft)

(25) Torque for the 3 modulating valves ... 50 ± 5 N·m (37 ± 4 lb ft)

Information System:

966H and 972H Wheel Loaders Differential and Final Drive Oil Sample - Obtain
966G II and 972G II Wheel Loaders Differential and Final Drive Oil - Change
3044C Industrial Engine and Engines for Caterpillar Built Machines Inlet and Exhaust Valve Seat Inserts - Remove and Install
953C Track-Type Loader Operation Information
966G II and 972G II Wheel Loaders Cooling System Coolant Sample (Level 1) - Obtain
953C Track-Type Loader Monitoring System
953C Track-Type Loader Sound Information and Vibration Information
TH210 and TH215 Telehandlers Cooling System Coolant Extender (ELC) - Add
3044C Industrial Engine and Engines for Caterpillar Built Machines Inlet and Exhaust Valve Guides - Remove and Install
966G II and 972G II Wheel Loaders Work Tool Positioner
3044C Industrial Engine and Engines for Caterpillar Built Machines Inlet and Exhaust Valves - Remove and Install
3054E Industrial Engine Electric Starting Motor - Remove and Install
953C Track-Type Loader Lubricant Viscosities
953C Track-Type Loader Circuit Breakers and Fuses - Reset/Replace
953C Track-Type Loader Hydrostatic Transmission and Hydraulic System Oil Sample - Obtain
3500B Series II Marine Engines System Overview
3516B Generator Set Engines with Dynamic Gas Blending Electronic Display Module
D3G, D4G and D5G Track-Type Tractors Electrohydraulic Engine Does Not Start and Status Indicator Is Continuously Red (MSS)
D6R Series II Track-Type Tractor Transmission System Oil - Change
3044C Industrial Engine and Engines for Caterpillar Built Machines Engine Oil Pump - Remove
TH220B, TH330B and TH340B Telehandlers Hydraulic System Hydraulic System Pressure - Release
TH220B, TH330B and TH340B Telehandlers Axle Breathers - Clean/Replace
3500B Series II Marine Engines Engine Monitoring System
953C Track-Type Loader Operator Controls