953C Track-Type Loader Hydraulic System Pilot Valve Caterpillar


Pilot Valve
`
953C Track-Type Loader Hydraulic System [RENR5650]
HYDRAULIC SYSTEM
VALVE GP-PILOT
953C Track-Type Loader Hydraulic System Lift and Tilt Pilot Control Valve
953C Track-Type Loader Hydraulic System Pilot Valve
1.1. Two Lever Bucket Control
2.1. Third Valve
3.1. Single Lever Bucket Control

Two Lever Bucket Control




Illustration 1g00407596

(A) Two Lever Bucket Control with Third Valve

(1) Lift Pilot Control Valve. (2) Tilt Pilot Control Valve. (3) Auxiliary Pilot Control Valve (Attachment).

(B) Two Lever Bucket Control

(5) Lift Pilot Control Valve. (6) Tilt Pilot Control Valve.

(4) Installation torque for two bolts ... 25 N·m (18.4 lb ft)

(7) Installation torque for two bolts ... 25 N·m (18.4 lb ft)




Illustration 2g00394504

Lift Pilot Control Valve

(1) Installation torque for two screws ... 1 N·m (9 lb in)

(2) Installation torque for two screws ... 9 N·m (80 lb in)

(3) Installation torque for two nuts ... 1.5 N·m (13 lb in)

Note: Remove plate (A) when this valve group is installed.




Illustration 3g00383053

Tilt Pilot Control Valve

(1) Installation torque for two screws ... 1 N·m (9 lb in)

(2) Installation torque for two screws ... 9 N·m (80 lb in)

(3) Installation torque for two nuts ... 1.5 N·m (13 lb in)

Note: Remove plate (A) when this valve group is installed.

Third Valve




Illustration 4g00383712

Auxiliary Pilot Control Valve (Attachment)

(1) Installation torque for two bolts ... 9 N·m (80 lb in)

(2) Installation torque for two nuts ... 1.5 N·m (13.27 lb in)

Note: Remove plate (A) when this valve group is installed.

Single Lever Bucket Control




Illustration 5g00407597

(A) Single Lever Bucket Control

(B) Single lever Bucket Control with Third Valve

(2) Third Valve Control Lever (Attachment)

(1) Installation torque for four bolts ... 12 N·m (9 lb ft)

(3) Installation torque for four bolts ... 12 N·m (9 lb ft)

(4) Installation torque for two bolts ... 25 N·m (18.4 lb ft)




Illustration 6g00806631

Single Lever Bucket Control (Joystick)

(1) Installation torque for one nut ... 30 N·m (22.12 lb ft)

(2) Installation torque for one nut ... 30 N·m (22.12 lb ft)

(3) Installation torque for four nuts ... 12 N·m (106 lb in)

(4) Installation torque for two plugs ... 15 N·m (11 lb ft)

(A) Raise

(B) Float

(C) Rackback

(D) Receptacle Assembly

Information System:

615C Series II Wheel Tractor-Scraper Wheel Tractor Power Train Leading Arm - Install
963C Track-Type Loader Power Train Hydraulic Drive Pump - Assemble
963C Track-Type Loader Power Train Hydraulic Drive Pump - Disassemble
615C Series II Wheel Tractor-Scraper Wheel Tractor Power Train Leading Arm - Remove
980G Series II Wheel Loader Operation Information
953C, 963C and 973C Track-Type Loaders Transmission Electronic Control System E703 High Right Track Steering Pressure
953C, 963C and 973C Track-Type Loaders Transmission Electronic Control System E702 High Left Track Steering Pressure
953C, 963C and 973C Track-Type Loaders Transmission Electronic Control System E626 Low Right Track Reverse Steering Pressure
953C, 963C and 973C Track-Type Loaders Transmission Electronic Control System E625 Low Right Track Forward Steering Pressure
953C, 963C and 973C Track-Type Loaders Transmission Electronic Control System E624 Low Left Track Reverse Steering Pressure
953C, 963C and 973C Track-Type Loaders Transmission Electronic Control System E623 Low Left Track Forward Steering Pressure
980H Wheel Loader Service Brake Control
3044C Industrial Engine and Engines for Caterpillar Built Machines Fuel Injection Lines - Remove and Install - Naturally Aspirated Engines
613C Series II Wheel Tractor Power Train Transmission and Transfer Gears - Remove
963C Track-Type Loader Maintenance Interval Schedule
3044C Industrial Engine and Engines for Caterpillar Built Machines Exhaust Manifold - Remove and Install
953C Track-Type Loader Hydraulic System Bucket Control Group
TH220B, TH330B and TH340B Telehandlers Transmission and Hydraulic System Oil Level - Check
613C Series II Wheel Tractor Power Train Transmission and Transfer Gears - Install
3044C Industrial Engine and Engines for Caterpillar Built Machines Engine Oil Filter Base - Remove and Install
980G Series II Wheel Loader Power Train Transmission Pressures - Test and Adjust
613C Series II Wheel Tractor Power Train Torque Converter - Remove
2003/05/12 Correction to Testing and Adjusting , "Transmission Pressures - Test and Adjust" {3081}
2003/05/19 Correction to Testing and Adjusting , "Ride Control Accumulator Recharging Procedure" {5077}