 | |
| Illustration 1 | g00887135 |
(1) Torque for bolt with lubricant on the threads ... 3100 ± 350 N·m (2300 ± 250 lb ft)
(2) Outer diameter of new piston over two lands ... 120.15 ± 0.03 mm (4.730 ± 0.001 inch)
(3) Bore of new cylinder ... 120.65 ± 0.08 mm (4.750 ± 0.003 inch)
(4) Outer diameter of new rod ... 63.450 ± 0.03 mm (2.498 ± 0.001 inch)
(5) Bore of new head over four lands ... 63.830 ± 0.03 mm (2.513 ± .001 inch)
(6) Lubricate sealing lips with a thin covering of the lubricant that is being sealed.
(7) Torque for head with clean grease on threads ... 600 ± 135 N·m (440 ± 95 lb ft)
(8) Apply 4C-4032 Sealant to the wiper seal groove prior to assembly.
Cylinder Lines
 | |
| Illustration 2 | g00996680 |
(9) Torque for four bolts ... 45 ± 7 N·m (33 ± 5 lb ft)
(10) Torque for four bolts ... 80 ± 4 N·m (59 ± 3.0 lb ft)
 | |
| Illustration 3 | g00996703 |
(11) Torque for one bolt ... 27 ± 7 N·m (20 ± 5 lb ft)
(12) Torque for one bolt ... 27 ± 7 N·m (20 ± 5 lb ft)