Naturally Aspirated Engines
 | |
| Illustration 1 | g01010241 |
(1) Tighten the body in the retaining nut to the following torque. ... 34 to 39 N·m (25 to 29 lb ft)
Note: The fuel injection nozzles should only be disassembled and assembled by personnel with the proper training.
(2) Tighten the fuel injection nozzle in the engine to the following torque. ... 53 to 65 N·m (39 to 48 lb ft)
Type of fuel injection nozzle ... single orifice
Injection pressure
- Standard at assembly ... 11.77 to 12.75 MPa (1707 to 1849 psi)
Turbocharged Engines
 | |
| Illustration 2 | g00993511 |
(1) Tighten the retaining nut to the following torque. ... 25 to 34 N·m (18 to 25 lb ft)
Note: The fuel injection nozzles should only be disassembled and assembled by personnel with the proper training.
Tighten the clamp bolt that secures the fuel injection nozzle in the cylinder head to the following torque. ... 21 to 23 N·m (15 to 17 lb ft)
Type of fuel injection nozzle ... multiple orifice
Injection pressure
- Standard at assembly ... 18.14 to 19.12 MPa (2631 to 2773 psi)