651E and 657E Wheel Tractor-Scrapers Wheel Scraper Power Train Scraper Wiring Group Caterpillar


Scraper Wiring Group
`



Illustration 1g01066855

Right side view




Illustration 2g01066856

Left side view

(1) Lubricate the seal with the lubricant that is being sealed.

(2) Torque for speed sensor ... 23.5 ± 3.5 N·m (17.33 ± 2.58 lb ft)

(3) Torque for nut on the switch ... 3.75 ± 0.25 N·m (33.190 ± 2.213 lb in)

(4) Switch assembly

Torque for mounting nuts ... 23 ± 4 N·m (17 ± 3 lb ft)
Torque for terminal nuts ... 8 ± 2 N·m (71 ± 18 lb in)

(5) Torque for nuts on the circuit breaker ... 4.6 ± 0.4 N·m (40.71 ± 3.54 lb in)




Illustration 3g01066857

Top view of wiring group and rear view of instrument panel

(6) Torque for mounting nuts ... 2.2 ± 0.1 N·m (19.47 ± 0.89 lb in)

(7) Torque for mounting nut ... 13.6 ± 4.0 N·m (10.03 ± 2.95 lb ft)

(8) Torque for mounting nut ... 18.5 ± 1.5 N·m (13.64 ± 1.11 lb ft)

(9) Torque for battery terminal nuts ... 7.2 ± 1.6 N·m (63.73 ± 14.16 lb in)

(10) Torque for nuts ... 20 ± 4 N·m (15 ± 3 lb ft)

Information System:

938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Main Control Valve - Remove
TH350B, TH360B, TH460B and TH560B Telehandlers Engine Supplement Engine Mount (Rear) - Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Pilot Operated Hydraulic Control (Joystick) - Assemble
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Pilot Operated Hydraulic Control (Joystick) - Disassemble
2003/03/10 A Change to the Transmission Cover Requires a New Tube Assembly {3064}
TH350B, TH360B, TH460B and TH560B Telehandlers Engine Supplement Engine Mount (Rear) - Remove
TH210 and TH215 Telehandlers Machine Systems Trailer Brake Valve (Hydraulic) - Remove and Install
TH210 and TH215 Telehandlers Machine Systems Diverter Valve - Remove and Install
TH350B, TH360B, TH460B and TH560B Telehandlers Engine Supplement Engine - Install
3034 Engine for Caterpillar Built Machines Pistons and Connecting Rods - Remove - Fractured Connecting Rod
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Piston Pump (Hydraulic Fan) - Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Piston Pump (Hydraulic Fan) - Remove
D6N Track-Type Tractor Machine Systems Sweeps - Remove and Install
D6N Track-Type Tractor Machine Systems Bulldozer Tilt Cylinder (VPAT) - Remove and Install
D6N Track-Type Tractor Machine Systems Bulldozer Lift Cylinder (VPAT) - Remove and Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Selector and Pressure Control Valve (Pilot) - Remove and Install
D10R Track-Type Tractor Hub Oil (Flexxaire Fan) - Change - If Equipped
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Main Control Valve - Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Pressure Reducing Valve (Traction Control System) - Remove and Install
3034 Engine for Caterpillar Built Machines Pistons and Connecting Rods - Remove - Serrated Connecting Rod
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Pilot Operated Hydraulic Control (Joystick) - Remove
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Diverter Valve (Quick Coupler) - Remove and Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Heater Coil - Remove
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Pilot Operated Hydraulic Control (Joystick) - Install