Camshaft
`
3500B and 3500C Marine Engines
[RENR5077]
BASIC ENGINE
CAMSHAFT GP
Show/hide table
| |
| Illustration 1 | g02582277 |
|
Typical example | |
Show/hide table
| Specification for 281-7849 Camshaft Gp and 281-7848 Camshaft Gp | |||
| Item | Qty | Part | Specification Description |
| A | - | - | Dimension of groove in a new camshaft for the thrust washer assembly is |
| C | 2 | 4N-1650 Dowel | Extension of the dowels between the camshafts is |
| D | 2 | 5B-5821 Dowel | Extension of the dowel from the camshaft assembly is |
| E | 2 | 128-5993 Thrust Washer | Thickness of a new thrust washer is |
| F | - | - | Diameter of bearing journal is Bore in camshaft bearing after installation is |
| - | - | - | End play for a new camshaft assembly is |
| 1 | 16 | 5P-0076 Bolt | Torque to |
Show/hide table
| |
| Illustration 2 | g02582338 |
Show/hide table
| Specification for 281-7849 Camshaft Gp and 281-7848 Camshaft Gp | |||
| Item | Qty | Part | Specification Description |
| - | - | - | Use the following procedure in order to determine the actual camshaft lobe lift:
1. Measure camshaft lobe height (H). 2. Measure base circle (J). 3. Subtract the base circle (J) from the camshaft lobe height (H). The difference is the actual camshaft lobe lift. |
| G | - | - | Specified camshaft lobe lift for
Inlet lobe is Injector lobe is Exhaust lobe is |
Information System:
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Piston and Vane Pump (Steering and Implement) - Install
3034 Engine for Caterpillar Built Machines
Pistons and Connecting Rods - Install - Fractured Connecting Rod
2003/04/01
New Flash File Software Is Used for Product Link 151/201 {7620}
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Piston and Vane Pump (Steering and Implement) - Remove
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Secondary Steering Pump and Electric Motor - Remove and Install
TH210 and TH215 Telehandlers Machine Systems
Hitch Cylinder - Remove and Install
TH350B, TH360B, TH460B and TH560B Telehandlers Engine Supplement
Engine - Remove
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Loader Frame and Rear Frame - Separate
Ejector Supplement for the AD55 Underground Articulated Truck{7000}
D6N Track-Type Tractor Machine Systems
Fuel Tank - Install
D6N Track-Type Tractor Machine Systems
Fuel Tank - Remove
D6N Track-Type Tractor Machine Systems
Seat - Remove and Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Vane Pump (Braking) - Remove
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Loader Frame and Rear Frame - Connect
D6N Track-Type Tractor Machine Systems
Bulldozer Angle Cylinder (VPAT) - Remove and Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Piston Pump (Hydraulic Fan) - Remove
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Piston Pump (Hydraulic Fan) - Install
3034 Engine for Caterpillar Built Machines
Pistons and Connecting Rods - Remove - Fractured Connecting Rod
TH350B, TH360B, TH460B and TH560B Telehandlers Engine Supplement
Engine - Install
TH210 and TH215 Telehandlers Machine Systems
Diverter Valve - Remove and Install
TH210 and TH215 Telehandlers Machine Systems
Trailer Brake Valve (Hydraulic) - Remove and Install
TH350B, TH360B, TH460B and TH560B Telehandlers Engine Supplement
Engine Mount (Rear) - Remove
2003/03/10
A Change to the Transmission Cover Requires a New Tube Assembly {3064}
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Pilot Operated Hydraulic Control (Joystick) - Disassemble