Engine Oil Pan
`
3500B, 776D, 777D, 784C, 785C, 789C, 793C and and 793D Off-Highway Truck/Tractors
[SENR1122]
3500B, 776D, 777D, 784C, 785C, 789C, 793C and and 793D Off-Highway Truck/Tractors
Engine Oil Level Switch
3500B, 776D, 777D, 784C, 785C, 789C, 793C and and 793D Off-Highway Truck/Tractors
Connecting Rod
Show/hide table
| |
| Illustration 1 | g02843997 |
Show/hide table
| Specification for 127-4462 Oil Pan Gp and 2W-0205 Oil Pan Gp | |||
| Item | Qty | Part | Specification Description |
| - | 15 | 1A-2029 Bolt | Use the following procedure in order to tighten the bolts: |
| 1. Tighten five bolts (12) to standard torque. | |||
| 2. Tighten bolt (1) through bolt (10) in a numerical sequence that is shown in Illustration 1 to standard torque. | |||
| 11 | - | - | Before assembly, apply red Loctite 596, Permatex No. 2 or red Loctite High Tack GS S to the joints of the gasket. |
| 13 | - | - | Before assembly, lightly lubricate the bore for the O-ring seals with the lubricant that is being sealed or an approved equivalent. |
| 14 | - | - | Before assembly, apply red Loctite 596, Permatex No. 2 or red Loctite High Tack GS S on connecting joint of the flywheel housing (19) and the rear of cylinder block, and connecting joint of the front accessory drive housing (18) and the front of cylinder block. |
| 15 | 38 | 5P-5855 Bolt | Apply green Loctite 290 to the open top end of the bolt holes after assembly of the oil pan. |
| 16 | 1 | 7E-2630 Oil Pan Gasket | Before assembly, apply red Loctite 596, Permatex No. 2 or red Loctite High Tack GS S to the sealing surface. |
| 17 | 1 | 142-4159 Integral Seal | Before assembly, apply red Loctite 596, Permatex No. 2 or red Loctite High Tack GS S to the sealing surface. |
| 20 | 1 | 4B-2363 Oil Drain Plug | Torque to |
| 21 | 1 | 6I-0723 Oil Drain Plug | Before assembly, lightly lubricate the threads with the lubricant that is being sealed or an approved equivalent. |
| Torque to |
|||
Information System:
938G Wheel Loader and IT38G Integrated Toolcarrier Hydraulic System
Pilot Valve
938G Wheel Loader and IT38G Integrated Toolcarrier Machine Systems
Steering Control Valve - Assemble
938G Wheel Loader and IT38G Integrated Toolcarrier Hydraulic System
Piston and Vane Pump (Implement Section)
938G Wheel Loader and IT38G Integrated Toolcarrier Machine Systems
Steering Control Valve - Disassemble
994 Wheel Loader Hydraulic System
Pump Drive (Front)
IT38G Integrated Toolcarrier and 938G Wheel Loader Steering System
Pressure and Flow Compensator Valve (Steering) - Adjust
938G Wheel Loader and IT38G Integrated Toolcarrier Steering System
Piston Pump (Steering)
3512 and 3516 EUI Engines and 784B, 785B, 789B and 793B Off-Highway Truck/Tractors
Accessory Drive (Lower Left Hand)
938G Wheel Loader and IT38G Integrated Toolcarrier Machine Systems
Piston and Vane Pump (Steering and Implement) - Install
938G Wheel Loader and IT38G Integrated Toolcarrier Machine Systems
Piston and Vane Pump (Steering and Implement) - Remove
994 Wheel Loader Hydraulic System
Piston Pump (Implement)
938G Wheel Loader and IT38G Integrated Toolcarrier Hydraulic System
Kickout System
994D Wheel Loader Hydraulic System
Linkage Pin and Seal Group (Bucket Control)
938G Wheel Loader and IT38G Integrated Toolcarrier Machine Systems
Cab - Remove
938G Wheel Loader and IT38G Integrated Toolcarrier Hydraulic System
Fan Drive System
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Torque Converter
938G Wheel Loader and IT38G Integrated Toolcarrier Machine Systems
Cab - Install
933C and 939C HYSTAT Track-Type Loaders
Bucket Rated Load
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System
Articulation Angle Position Sensor - Adjust and Calibrate
938G Wheel Loader and IT38G Integrated Toolcarrier Hydraulic System
Gear Pump (Fan Drive)
IT38G Integrated Toolcarrier and 938G Wheel Loader Steering System
Piston Pump (Steering) Low Pressure Standby - Test
938G Wheel Loader and IT38G Integrated Toolcarrier Hydraulic System
Gear Motor (Fan Drive)
IT38G Integrated Toolcarrier and 938G Wheel Loader Steering System
Piston Pump (Steering) Margin Pressure - Test
621F, 623F and 627F Wheel Tractor-Scrapers Power Train
Transmission Hydraulic Control