Alternator and Regulator
`
3408E and 3412E Engines for Caterpillar Built Machines
[SENR1017]
ELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGING
3408E and 3412E Engines for Caterpillar Built Machines
Alternator and Regulator
3408E and 3412E Engines for Caterpillar Built Machines
Alternator and Regulator
3306C Engines for Caterpillar Built Machines
Alternator and Regulator
3408E and 3412E Engines for Caterpillar Built Machines
Alternator and Regulator
Show/hide table
Illustration 1 | g02560178 |
Show/hide table
Specification for 9X-7803 Charging Alternator Gp | |||
Item | Qty | Part | Specification Description |
- | - | - | Load the battery with a carbon pile 4C-4911 Battery Load Tester in order to get the maximum alternator output. |
1 | 1 | 2K-4821 Locknut | Torque to |
2 | - | - | (R) terminal is the AC tap from stator and is not to be used for diagnostics. |
3 | 1 | 6V-8189 Nut | Use a 7/16 ring terminal for (B+) terminal. |
(B+) terminal. Torque to |
|||
4 | 1 | 5S-7349 Bolt | (B-) terminal. Torque to |
5 | 1 | 185-2648 Voltage Regulator As | Voltage setting is not adjustable.
Permissible voltage range is 27 to 29 V. |
- | - | - | Voltage is 24 V. |
- | - | - | Amperage is 95 amp. |
- | - | - | Polarity is negative ground. |
- | - | - | Rotation is clockwise. |
- | - | - | Maximum turn on speed is 2000 rpm. |
- | - | Alternator performance at |
|
- | - | - | Minimum full load current at 5000 rpm is 95 amp. |
- | - | - | Minimum full load current at 2000 rpm is 28 amp. |
- | - | - | Output voltage is 28 ± 1 V. |
Information System:
966G and 972G Wheel Loaders
Seat
3306B Industrial Engine
Severe Service Application - Check
3500B Engines for Caterpillar Built Power Modules
Balancer Group (Front)
966G and 972G Wheel Loaders
Heating and Air Conditioning Control
D9R Track-Type Tractor
Lubricant Information
D6M Track-Type Tractor
Bulldozer Blade Tip
3500B Engines for Caterpillar Built Power Modules
Housing (Front)
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
Seat
966G and 972G Wheel Loaders
Window Wiper and Washer Control
3500B Engines for Caterpillar Built Power Modules
Crankshaft Wear Sleeves and Seals
966G and 972G Wheel Loaders
Light Switches
980G Wheel Loader
Warning Categories (Caterpillar Monitoring System)
G3304 and G3306 Engines
Belt Tension Chart
3406C Engines for Caterpillar Built Machines
Electric Starting Motor
992G Wheel Loader Electrohydraulic System
Electrohydraulic Control
3126E and 3126B Commercial and Truck Engines
Electrical System
992G Wheel Loader and 854G Wheel Dozer Steering System
Steering Control Support
3408E and 3412E Engines for Caterpillar Built Machines
Coolant Flow Switch
992G Wheel Loader and 854G Wheel Dozer Steering System
Filters (Steering)
824G , 825G and 826G Landfill Compactor
Autoshift Control
3500B Engines for Caterpillar Built Power Modules
Engine Oil Pump
992G Wheel Loader and 854G Wheel Dozer Steering System
Secondary Steering System - If Equipped
992G Wheel Loader and 854G Wheel Dozer Power Train
General Information
3500B Engines for Caterpillar Built Power Modules
Gear Group (Front)