3500B Engines for Caterpillar Built Power Modules Housing (Front) Caterpillar


Housing (Front)
`



Illustration 1g01430989

Table 1
Specification for 4P-5426 Front Housing Gp    
Item     Qty     Part     Specification Description    
1     7     8T-6765 Pipe Plug     Diameter is 1/4 inch. Length is
14.2 mm (0.56 inch).    
2     4     9H-8260 Bolt     Diameter is 1/2 inch. Length is
158.75 mm (6.250 inch).    
3     6     2A-5220 Plug     Torque to
25 ± 5 N·m (221 ± 44 lb in).    
4     4     0S-1587 Bolt     Diameter is 1/2 inch. Length is
44.45 mm (1.750 inch).    
5     10     1D-4593 Bolt     Diameter is 5/8 inch. Length is
139.7 mm (5.50 inch).    
6     -     -     After assembly, trim gasket flush to face (7).    
Use standard torque for the fasteners listed above.    

Information System:

D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Seat
966G and 972G Wheel Loaders Window Wiper and Washer Control
3500B Engines for Caterpillar Built Power Modules Crankshaft Wear Sleeves and Seals
966G and 972G Wheel Loaders Light Switches
980G Wheel Loader Warning Categories (Caterpillar Monitoring System)
980G Wheel Loader Battery Disconnect Switch
980G Wheel Loader Plate Locations and Film Locations
143H and 163H Motor Graders Tire Inflation with Nitrogen
980G Wheel Loader Sound Information and Vibration Information
3508B Engine for Caterpillar Built Machines Air Inlet and Exhaust Lines
3508B Engine for Caterpillar Built Machines Cylinder Head
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Battery Electrolyte Level - Check
D6M Track-Type Tractor Bulldozer Blade Tip
D9R Track-Type Tractor Lubricant Information
966G and 972G Wheel Loaders Heating and Air Conditioning Control
3500B Engines for Caterpillar Built Power Modules Balancer Group (Front)
3306B Industrial Engine Severe Service Application - Check
966G and 972G Wheel Loaders Seat
3408E and 3412E Engines for Caterpillar Built Machines Alternator and Regulator
G3304 and G3306 Engines Belt Tension Chart
3406C Engines for Caterpillar Built Machines Electric Starting Motor
992G Wheel Loader Electrohydraulic System Electrohydraulic Control
3126E and 3126B Commercial and Truck Engines Electrical System
992G Wheel Loader and 854G Wheel Dozer Steering System Steering Control Support