3500B Engines for Caterpillar Built Power Modules Valve Mechanism Caterpillar


Valve Mechanism
`


Illustration 1g03322742

Table 1
Specification for 195-1928 Valve Mechanism Gp, and 100-3905 Valve Mechanism Gp 
Item  Qty  Part  Specification Description 
3J-9196 Jam Nut  Torque to 70 ± 15 N·m (52 ± 11 lb ft)
230-2633 Shaft As  Diameter of the rocker arm shaft assembly is 45.000 ± 0.013 mm (1.7716 ± 0.0005 inch) 
Dimension for the valve lash:
Inlet valve 0.50 mm (0.020 inch)
Exhaust valve 1.00 mm (0.040 inch)
230-2620 Bushing  Bore in the bushing for the rocker arm shaft assembly after installation is 45.077 ± 0.015 mm (1.7747 ± 0.0006 inch)
Diameter of the valve lifter assembly is 29.900 ± 0.010 mm (1.1772 ± 0.0004 inch).
Bore in the cylinder head for valve lifter assembly is 30.000 ± 0.025 mm (1.1811 ± 0.0010 inch)

Information System:

3500B Engines for Caterpillar Built Power Modules Fuel Injector
D11R Track-Type Tractor After Starting Engine
3508B Engine for Caterpillar Built Machines Fuel Injector Mechanism
3500B Engines for Caterpillar Built Power Modules Fuel Transfer Pump
992G Wheel Loader and 854G Wheel Dozer Power Train Axle Oil Cooler
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Starting with Auxiliary Start Receptacle
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Fuel System Primary Filter - Replace
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Engine Oil and Filter - Change
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Starting with Jump Start Cables
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Starting Above 0°C (32°F)
992G Wheel Loader and 854G Wheel Dozer Steering System General Information (Steering)
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Cooling System Level - Check
3500B Engines for Caterpillar Built Power Modules Camshaft
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Battery Electrolyte Level - Check
3508B Engine for Caterpillar Built Machines Cylinder Head
3508B Engine for Caterpillar Built Machines Air Inlet and Exhaust Lines
980G Wheel Loader Sound Information and Vibration Information
143H and 163H Motor Graders Tire Inflation with Nitrogen
980G Wheel Loader Plate Locations and Film Locations
980G Wheel Loader Battery Disconnect Switch
980G Wheel Loader Warning Categories (Caterpillar Monitoring System)
966G and 972G Wheel Loaders Light Switches
3500B Engines for Caterpillar Built Power Modules Crankshaft Wear Sleeves and Seals
966G and 972G Wheel Loaders Window Wiper and Washer Control