3500B Engines for Caterpillar Built Power Modules Fuel Transfer Pump Caterpillar


Fuel Transfer Pump
`
3500B Engines for Caterpillar Built Power Modules [RENR4927]


Illustration 1g06507738

Table 1
Item  Qty  Part  Specification Description 
7C-2870 Terminal Bushing  Before installation, inside diameter of the terminal bushing for gear shaft is 12.783 mm (0.5033 inch).
Installation depth of terminal bushing is 1.5 ± 0.5 mm (0.06 ± 0.02 inch)
268-1903 Drive Shaft As  Diameter of the gear is 29.801 ± 0.006 mm (1.1733 ± 0.0002 inch).
Length of the gear is 25.347 ± 0.008 mm (0.9979 ± 0.0003 inch)
1W-4003 Idler Gear As  Diameter of the idler gear assembly is 29.801 ± 0.006 mm (1.1733 ± 0.0002 inch).
Length of the gear is 25.347 ± 0.008 mm (0.9979 ± 0.0003 inch)
313-7770 Fuel Transfer Pump Gp  Displacement is 21 L/min (6 US gpm) at 415 kPa (60 psi) and 2400 rpm. 

Information System:

992G Wheel Loader and 854G Wheel Dozer Power Train Axle Oil Cooler
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Starting with Auxiliary Start Receptacle
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Fuel System Primary Filter - Replace
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Engine Oil and Filter - Change
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Starting with Jump Start Cables
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Starting Above 0°C (32°F)
992G Wheel Loader and 854G Wheel Dozer Steering System General Information (Steering)
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Cooling System Level - Check
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Cooling System Coolant Additive (DEAC) - Add
D6M Track-Type Tractor Sampling Interval and Location of Sampling Valve
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Cooling System Coolant (DEAC) - Change
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Changing Direction and Speed
3508B Engine for Caterpillar Built Machines Fuel Injector Mechanism
D11R Track-Type Tractor After Starting Engine
3500B Engines for Caterpillar Built Power Modules Fuel Injector
3500B Engines for Caterpillar Built Power Modules Valve Mechanism
3500B Engines for Caterpillar Built Power Modules Camshaft
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Battery Electrolyte Level - Check
3508B Engine for Caterpillar Built Machines Cylinder Head
3508B Engine for Caterpillar Built Machines Air Inlet and Exhaust Lines
980G Wheel Loader Sound Information and Vibration Information
143H and 163H Motor Graders Tire Inflation with Nitrogen
980G Wheel Loader Plate Locations and Film Locations
980G Wheel Loader Battery Disconnect Switch