Implement Electronic Control Pinout Specifications
`
992G Wheel Loader Electrohydraulic System
[SENR1366]
992G Wheel Loader Electrohydraulic System
Linkage Pin and Seal Group (Bucket Control)
992G Wheel Loader Electrohydraulic System
Electrohydraulic Control
ELECTRICAL AND STARTING SYSTEM
ELECTRONICS GP-IMPLEMENT
992G Wheel Loader Electrohydraulic System
Implement Electronic Control Pinout Specifications
992G Wheel Loader Electrohydraulic System
Implement Electronic Control Pinout Specifications
Show/hide table
| |
| Illustration 1 | g00105158 |
|
Implement Control (1) Connector J1. (2) Connector J2. | |
Show/hide table
| |
| Illustration 2 | g00105159 |
|
Implement Control Connector | |
Show/hide table
| 40-Pin Connector J1 | |
|---|---|
| Pin | Function |
| 1 | + 24 Volt ECM Supply Voltage |
| 2 | Ground |
| 3 | AVS Data Link − |
| 4 | Pilot Control Actuator (Lower Solenoid) (Number 1) |
| 5 | Ground |
| 6 | + 24 Volt ECM Supply Voltage |
| 7 | Solenoid Return |
| 8 | Solenoid Valve (Hydraulic Lockout) |
| 9 | AVS Data Link + |
| 10 | Pilot Control Actuator (Raise Solenoid) (Number 1) |
| 11 | Pilot Control Actuator (Dump Solenoid) (Number 1) |
| 13 | Switch (Hydraulic Lockout) (NO) |
| 14 | Switch (Hydraulic Lockout) (NC) |
| 15 | Switch and Sensor Ground |
| 16 | Switch and Sensor Ground |
| 17 | Pilot Control Actuator (Tilt Back Solenoid) (Number 1) |
| 18 | Detent Coil (Lift Kickout) |
| 19 | Kickout Set Switch (NO) |
| 20 | Bucket Kickout Set Switch (NO) |
| 21 | Switch (Steering Pump Case Drain Filter) |
| 22 | Switch (Case Drain Filter) (Fixed Displacement Piston Pump) |
| 25 | Switch (Case Drain Filter) (Variable Displacement Piston Pump) |
| 26 | Switch (Case Drain Filter) (Hydraulic Fan Motor) |
| 29 | Switch (Case Drain Filter) (Hydraulic Fan Pump) |
| 31 | Switch (Pump Filter) (Front Axle) |
| 33 | Switch (Pump Filter) (Rear Axle) |
| 35 | Switch(Case Drain Filter) (Brake Pump) |
| 40 | + 24 Volt ECM Supply Voltage |
Show/hide table
| 40-Pin Connector J2 | |
|---|---|
| Pin | Function |
| 1 | Pilot Control Actuator (Raise Solenoid) (Number 2) |
| 2 | Solenoid (Variable Displacement Piston Pump) |
| 3 | Solenoid Return |
| 4 | Lift Lever Position Sensor |
| 5 | Tilt Lever Position Sensor |
| 7 | Pilot Control Actuator (Tilt Back Solenoid) (number 2) |
| 8 | Pilot Control Actuator ( Lower Solenoid) (number 2) |
| 13 | Detent Coil (Bucket Kickout) |
| 14 | Tilt Linkage Position Sensor |
| 19 | Pilot Control Actuator (Dump Solenoid) (number 2) |
| 35 | Lift Linkage Position Sensor |
| 37 | Detent Coil (Lower Kickout) |
Information System:
938G Wheel Loader and IT38G Integrated Toolcarrier
Battery Disconnect Switch
938G Wheel Loader and IT38G Integrated Toolcarrier
Plate Locations and Film Locations
Installation of Retractable Seat Belt{7327}
D7R Track-Type Tractor
Machine Operation Information
D7R Track-Type Tractor
Refill Capacities
938G Wheel Loader and IT38G Integrated Toolcarrier
Cooling System Water Temperature Regulator - Replace
D7R Track-Type Tractor
Braking System - Test
IT28G Integrated Toolcarrier and 928G Wheel Loader
Axle Housing and Bearing Preload Adjustment
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Capacities (Refill)
D7R Track-Type Tractor
Sound Information and Vibration Information
IT28G Integrated Toolcarrier and 928G Wheel Loader
Limited Slip Differential
IT28G Integrated Toolcarrier and 928G Wheel Loader
Differential Backlash and Bearing Adjustment
938G Wheel Loader and IT38G Integrated Toolcarrier
Engine Air Filter Secondary Element - Replace
631E Series II Wheel Tractor-Scrapers
General Hazard Information
938G Wheel Loader and IT38G Integrated Toolcarrier
Cooling System Coolant (ELC) - Change
938G Wheel Loader and IT38G Integrated Toolcarrier
Cooling System Coolant Extender (ELC) - Add
938G Wheel Loader and IT38G Integrated Toolcarrier
Differential and Final Drive Oil - Change
938G Wheel Loader and IT38G Integrated Toolcarrier
Differential and Final Drive Oil Level - Check
938G Wheel Loader and IT38G Integrated Toolcarrier
Engine Governor Oil Supply Screen - Clean/Inspect/Replace
938G Wheel Loader and IT38G Integrated Toolcarrier
Engine Oil Level - Check
938G Wheel Loader and IT38G Integrated Toolcarrier
Engine Oil and Filter - Change
938G Wheel Loader and IT38G Integrated Toolcarrier
Fuses - Replace
938G Wheel Loader and IT38G Integrated Toolcarrier
Fuel System - Prime
938G Wheel Loader and IT38G Integrated Toolcarrier
Fuel System Primary Filter (Water Separator) - Drain