IT28G Integrated Toolcarrier and 928G Wheel Loader Axle (Oscillating) Caterpillar


Axle (Oscillating)
`



Illustration 1g01172422

(1) Rubber toric seals and all surfaces in contact with rubber toric seals must be clean and dry at assembly. Put a thin layer of oil on the surfaces of the metal seals that are in contact before installation. The metal seal must be assembled square with the bore. Be certain that the rubber toric seals do not bulge. Be certain that the toric seals are not twisted.

(2) Torque for the oil gauge assembly ... 45 ± 6 N·m (33 ± 4 lb ft)

(3) Torque for 32 bolts ... 300 ± 40 N·m (220 ± 30 lb ft)

(4) Torque for plug ... 45 ± 6 N·m (33 ± 4 lb ft)

(5) Torque for six bolts ... 120 ± 20 N·m (89 ± 15 lb ft)

(6) Torque for six bolts ... 120 ± 20 N·m (89 ± 15 lb ft)




Illustration 2g00104620

Detail A

(7) Outside diameter of the pinion housing ... 157.57 ± 0.08 mm (6.204 ± 0.003 inch)

(8) Inside diameter of the differential support bearing ... 173.46 ± 0.05 mm (6.829 ± 0.002 inch)

(9) Bearing

Inside diameter ... 158.43 ± 0.13 mm (6.237 ± 0.005 inch)
Outside diameter ... 173.95 ± 0.13 mm (6.848 ± 0.005 inch)



Illustration 3g00104623

Detail B

(10) Outside Diameter of the trunnion bearing ... 101.45 ± 0.08 mm (3.994 ± 0.003 inch)

(11) Bearing

Inside diameter ... 102.44 ± 0.13 mm (4.033 ± 0.005 inch)
Outside diameter ... 114.78 ± 0.08 mm (4.519 ± 0.003 inch)

(12) Inside Diameter of the differential support bearing ... 114.30 ± 0.05 mm (4.500 ± 0.002 inch)




Illustration 4g00104631

(13) Torque for 12 bolts ... 800 ± 100 N·m (590 ± 75 lb ft)

(14) Torque for 8 bolts ... 300 ± 40 N·m (221 ± 30 lb ft)

(15) Torque for 8 bolts ... 300 ± 40 N·m (221 ± 30 lb ft)

(16) Torque for fitting ... 13 ± 4 N·m (10 ± 3 lb ft)

(17) Torque for six bolts ... 28 ± 7 N·m (21 ± 5 lb ft)




Illustration 5g00104646

(18) Torque for three plugs ... 90 ± 15 N·m (66 ± 10 lb ft)

(19) Torque for two fittings ... 11 ± 4 N·m (8 ± 3 lb ft)

(20) Torque for fitting ... 13 ± 4 N·m (10 ± 3 lb ft)

(21) Torque for fitting ... 13 ± 4 N·m (10 ± 3 lb ft)

(22) Torque for fitting ... 13 ± 4 N·m (10 ± 3 lb ft)

Information System:

D7R Track-Type Tractor Starting Below 0°C (32°F) with Ether Starting Aid
IT28G Integrated Toolcarrier and 928G Wheel Loader Transmission Clutch Running Clearance
D7R Track-Type Tractor Transmission Oil Filter - Replace
D7R Track-Type Tractor Transmission Oil - Change
992G Wheel Loader and 854G Wheel Dozer Power Train Selector and Pressure Control Valve (Transmission)
D7R Track-Type Tractor Lifting and Tying Down the Machine
D7R Track-Type Tractor Refill Capacities
992G Wheel Loader and 854G Wheel Dozer Power Train Transmission Hydraulic Control
D7R Track-Type Tractor Model View Illustrations
D7R Track-Type Tractor Hydraulic System Oil Level - Check
992G Wheel Loader and 854G Wheel Dozer Power Train Oil Filter (Power Train)
D7R Track-Type Tractor Hydraulic System Oil Filter - Replace
Installing Maintenance Free Linkage Seals{6107}
D7R Track-Type Tractor Lifting and Tying Down the Machine
IT28G Integrated Toolcarrier and 928G Wheel Loader Brake and Planetary
D7R Track-Type Tractor Model View Illustrations
IT28G Integrated Toolcarrier and 928G Wheel Loader Differential Pinion Preload Adjustment
992G Wheel Loader and 854G Wheel Dozer Power Train Transmission Planetary
IT28G Integrated Toolcarrier and 928G Wheel Loader Differential Backlash and Bearing Adjustment
IT28G Integrated Toolcarrier and 928G Wheel Loader Limited Slip Differential
D7R Track-Type Tractor Sound Information and Vibration Information
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Capacities (Refill)
IT28G Integrated Toolcarrier and 928G Wheel Loader Axle Housing and Bearing Preload Adjustment
D7R Track-Type Tractor Braking System - Test