IT28G Integrated Toolcarrier and 928G Wheel Loader Transmission Case Caterpillar

Illustration 1	g00104425

(1) Torque for six bolts ... 55 ± 10 N·m (41 ± 7 lb ft)

(2) Torque for two bolts ... 55 ± 10 N·m (41 ± 7 lb ft)

(3) Torque for two bolts ... 55 ± 10 N·m (41 ± 7 lb ft)

(4) Torque for plug ... 35 ± 3 N·m (26 ± 2 lb ft)

(5) Torque for four bolts ... 100 ± 20 N·m (74 ± 15 lb ft)

(6) Torque for twelve bolts ... 70 ± 10 N·m (52 ± 7 lb ft)

(7) Torque for plug ... 35 ± 3 N·m (26 ± 2 lb ft)

(8) Torque for six nuts ... 12 ± 3 N·m (9 ± 2 lb ft)

(9) Torque for three bolts ... 55 ± 10 N·m (41 ± 7 lb ft)

(10) 6V-2455 Sensor Assembly

Apply "white" adhesive sealant to the threads. Screw the sensor all the way into the housing until the sensor is against the gear. Unscrew the sensor for one half of a turn. Torque for the locknut ... 25 ± 5 N·m (18 ± 4 lb ft)

(11) Torque for bolt ... 55 ± 10 N·m (41 ± 7 lb ft)

Illustration 2	g00104441

(12) Torque for adapter ... 330 ± 30 N·m (243 ± 22 lb ft)

(13) Torque for two plugs ... 100 ± 10 N·m (74 ± 7 lb ft)

Illustration 3	g00104450

(14) 9G-5127 Breather

Torque for Breather ... 35 N·m (26 lb ft)

(15) Torque for three plugs ... 100 ± 20 N·m (74 ± 15 lb ft)

(16) Torque for four bolts ... 55 ± 10 N·m (41 ± 7 lb ft)

(17) Torque for plug ... 100 ± 10 N·m (74 ± 7 lb ft)

(18) Torque for three bolts ... 28 ± 7 N·m (21 ± 5 lb ft)

(19) Torque for bolt ... 55 ± 10 N·m (41 ± 7 lb ft)

(20) Torque for bolt ... 55 ± 10 N·m (41 ± 7 lb ft)

Illustration 4	g00104461
View A-A

Illustration 5	g00104536
View B-B

(21) Torque for six bolts ... 55 ± 10 N·m (41 ± 7 lb ft)

Note: As required, use shims to get the bearing end play between 0.05 to 0.15 mm (0.002 to 0.006 inch.)

(22) 6Y-9016 Shim Pack consists of the following items.

Four shims ... 0.05 mm (0.002 inch)

Two shims ... 0.80 mm (0.032 inch)

Six shims ... 0.20 mm (0.008 inch)

(23) Installation depth for 2W-1141 Bearing ... 3.5 ± 0.5 mm (0.138 ± 0.012 inch)

Illustration 6	g00104548
View C-C

(24) 6Y-2103 Torque converter inlet relief valve

Illustration 7	g00104538
View D-D

(25) 9W-7189 Flow Control Valve

(26) 4M-7945 Spring

Length under test force ... 53.85 mm (2.12 inch)

Test force ... 15.2 ± 1.2 N·m (11.2 ± 0.9 lb ft)

Free length after the test ... 65.0 mm (2.56 inch)

Outside diameter ... 17.27 mm (0.680 inch)