IT28G Integrated Toolcarrier and 928G Wheel Loader Torque Converter Caterpillar


Torque Converter
`
IT28G Integrated Toolcarrier and 928G Wheel Loader [SENR1219]
POWER TRAIN
TORQUE CONVERTER GP
IT28G Integrated Toolcarrier and 928G Wheel Loader Torque Converter



Illustration 1g00103972

(1) Torque for 18 bolts ... 30 ± 5 N·m (22 ± 4 lb ft)

(2) Torque for six bolts ... 30 ± 5 N·m (22 ± 4 lb ft)

(3) Torque for six bolts ... 30 ± 5 N·m (22 ± 4 lb ft)

Table 1
Clearance     Measurement across the Diameter     Running (1)    
Measure the clearance (A) between the stator and the turbine.     new    
0.55 to 0.71 mm (0.022 to 0.028 inch)    

0.28 to 0.36 mm (0.011 to 0.014 inch)    
maximum wear
1.15 mm (0.045 inch)    

0.58 mm (0.023 inch)    
Measure the clearance (B) between the stator and the impeller.     new    
0.53 to 0.69 mm (0.021 to 0.027 inch)    

0.27 to 0.35 mm (0.011 to 0.014 inch)    
maximum wear
1.15 mm (0.045 inch)    

0.58 mm (0.023 inch)    
( 1 ) Measure half the clearance across the diameter.