950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Braking System Vane Pump (Implement, Pilot and Braking) Caterpillar

Illustration 1	g00295806
(3) Outlet for the pilot/brake pump. (4) Outlet for implement pump. (7) Pilot/brake pump. (8) Implement pump. (9) Inlet.

(1) Torque for the nut ... 175 ± 15 N·m (130 ± 10 lb ft)

(2) Torque for the four bolts ... 230 ± 23 N·m (170 ± 17 lb ft)

(5) Torque for the two studs ... 115 ± 12 N·m (85 ± 9 lb ft)

(6) Torque for the two bolts ... 115 ± 12 N·m (85 ± 9 lb ft)

The pilot and braking pump and the implement pump are vane pumps.

The rotation of the shaft is counterclockwise when the pump is viewed from the shaft end.

For the pump flow test, use SAE 10W that is at 65°C (150°F).

Pilot and Braking Pump

Test at Full Speed:

Output ... 37 L/min (10 US gpm)

Pressure ... 690 kPa (100 psi)

Pump speed ... 2200 rpm

Engine speed ... 2200 rpm

Output ... 34 L/min (9 US gpm)

Pressure ... 6900 kPa (1000 psi)

Pump speed ... 2200 rpm

Engine speed ... 2200 rpm

Test at Half Speed:

Output ... 19 L/min (5.0 US gpm)

Pressure ... 690 kPa (100 psi)

Pump speed ... 1100 rpm

Engine speed ... 1100 rpm

Output ... 17 L/min (4.5 US gpm)

Pressure ... 6900 kPa (1000 psi)

Pump speed ... 1100 rpm

Engine speed ... 1100 rpm

Implement Pump

Test at Full Speed:

Output ... 292 L/min (77 US gpm)

Pressure ... 690 kPa (100 psi)

Pump speed ... 2200 rpm

Engine speed ... 2200 rpm

Output ... 263 L/min (69 US gpm)

Pressure ... 6900 kPa (1000 psi)

Pump speed ... 2200 rpm

Engine speed ... 2200 rpm

Test at Half Speed:

Output ... 146 L/min (39 US gpm)

Pressure ... 690 kPa (100 psi)

Pump speed ... 1100 rpm

Engine speed ... 1100 rpm

Output ... 132 L/min (35 US gpm)

Pressure ... 6900 kPa (1000 psi)

Pump speed ... 1100 rpm

Engine speed ... 1100 rpm