992G Wheel Loader and 854G Wheel Dozer Power Train Oscillating Axle (Rear) Caterpillar


Oscillating Axle (Rear)
`



Illustration 1g00103041

Top View

(1) Torque for the six bolts ... 1150 ± 150 N·m (840 ± 110 lb ft)

(2) Torque for the 16 bolts that retain the rear trunnion support to the rear main frame ... 1150 ± 150 N·m (840 ± 110 lb ft)




Illustration 2g00103042

Rear View

(3) Torque for the 16 bolts ... 475 ± 60 N·m (350 ± 44 lb ft)




Illustration 3g00103045

View A-A

(4) Torque for the four bolts at four locations "X" on both axle flanges ... 1125 ± 100 N·m (820 ± 75 lb ft)

(5) Torque for installing 30 full nuts on each of the axle flanges ... 1125 ± 100 N·m (820 ± 75 lb ft)




Illustration 4g01366941

View B-B

(6) Torque for the 12 bolts ... 475 ± 60 N·m (350 ± 44 lb ft)

(A) Outside diameter of the trunnion ... 330.15 ± 0.05 mm (12.998 ± 0.002 inch)

(B) Inside diameter of the trunnion support ... 349.20 ± 0.10 mm (13.748 ± 0.004 inch)

(7) Apply 6V-5765 Sealant to the machined face of the support before you install the retainer.

(8) Apply 6V-5765 Sealant to the machined face of the support before you install the cover.

(9) Sleeve bearing

Outside diameter of the sleeve bearing ... 349.53 ± 0.15 mm (13.761 ± 0.006 inch)
Inside diameter of the sleeve bearing ... 331.19 ± 0.15 mm (13.039 ± 0.006 inch)

(10) Torque for the 16 bolts ... 750 ± 90 N·m (550 ± 65 lb ft)

(11) Sleeve bearing

Outside diameter of the sleeve bearing ... 349.53 ± 0.15 mm (13.761 ± 0.006 inch)
Inside diameter of the sleeve bearing ... 331.19 ± 0.15 mm (13.039 ± 0.006 inch)

(C) Outside diameter of the housing assembly ... 330.15 ± 0.05 mm (12.998 ± 0.002 inch)

(D) Inside diameter of the trunnion support ... 349.20 ± 0.10 mm (13.748 ± 0.004 inch)