 | |
| Illustration 1 | g00100339 |
(1) The two bolts that are next to the notches in the housing are used to assemble the package. Torque for two bolts ... 270 ± 40 N·m (200 ± 30 lb ft)
(2) Torque for the 17 bolts ... 270 ± 40 N·m (200 ± 30 lb ft)
 | |
| Illustration 2 | g01076434 |
View A-A | |
(3) 7S-3997 Spring
- Length under test force ... 69.34 mm (2.730 inch)
- Test force ... 3894 ± 312 N (875 ± 70 lb)
- Free length after test ... 82.75 mm (3.258 inch)
- Outside diameter ... 42.88 mm (1.688 inch)
- Test force ... 3894 ± 312 N (875 ± 70 lb)
(4) Thickness of seven new discs with six new plates
- Thickness of the discs and the plates ... 74.61 ± 1.04 mm (2.937 ± .041 inch)
- Minimum thickness of the worn plates and the worn discs ... 70.0 mm (2.76 inch)
(5) Seal the circular area with 6V-5765 RTV Silicone Sealant when you install the plates and the discs.
(6) Thickness of one new 1V-8279 Brake Disc Assembly ... 4.95 ± 0.08 mm (.195 ± .003 inch)
(7) Torque for the one bolt ... 105 ± 20 N·m (75 ± 15 lb ft)
(8) Lubricate the seal with the lubricant that is being sealed.
(9) Bore diameter in the housing for the parking brake release piston.
- Bore diameter ... 57.163 ± 0.013 mm (2.2505 ± .0005 inch)
- Outside diameter of the parking brake release piston ... 57.099 ± 0.013 mm (2.2480 ± .0005 inch)
(10) Thickness of one new 4E-7519 Plate ... 6.66 ± 0.08 mm (.262 ± .003 inch)