C15 and C18 Engines for Caterpillar Built Machines Fuel Filter Base Caterpillar


Fuel Filter Base
`


Illustration 1g06588286

Table 1
Item  Qty  Part  Specification Description 
234-5013 Temperature Sensor Gp  Final installation torque is 20 ± 3 N·m (177 ± 27 lb in).
Output type is passive. 
275-1253 Pressure Switch Gp  Torque to 6.78 ± 1.41 N·m (60.01 ± 12.48 .lb in)
Contact position is normally closed below de-actuation pressure.
Minimum de-actuation pressure at -40° to 121°C (-104° to 250°F) is 69 kPa (10 psi)
1R-0749 Fuel Filter  Lubricate the seal and the bore lightly with the lubricant that is being sealed or equivalent.
To install filter, turn one full rotation after first gasket contact. 


Illustration 2g06588288
389-1072 Fuel Filter Base As

Table 2
Item  Qty  Part  Specification Description 
9S-4167 Hollow Stud  Use the following procedure to tighten the stud:
1. Before assembly, apply Loctite® 263(1) or Loctite® 270(2) to the threads.
2. Torque to 70 ± 15 N·m (52 ± 11 lb ft)
Distance between the sealing surface of the base to the end of the hollow stud (D1) is 24.6 mm (0.97 inch).
(1) U.S and Rest of World.
(2) Europe only.

Information System:

Improved Seat Belt Group is Now Used on Certain Wheel Loaders {7327}
Procedure to Repair or Replace Toggle Switch on Certain Cat</SUP> Products {7332}
Caterpillar Repainting Process (Chemical Agent Resistant Coating) CARC Paint per MIL-DTL-53072 {0652}
Cat Reman Discontinues Complete Reman Engines for Certain Underground Mining Products {1000}
C15 and C18 Engines for Caterpillar Built Machines Flywheel Housing
953 and 963 Track-Type Loader Systems Window Wiper and Wiper Motor
953 and 963 Track-Type Loader Systems Track Roller - Single Flange
953 and 963 Track-Type Loader Systems Track Roller (Double Flange)
953 and 963 Track-Type Loader Systems Tilt Cylinder
D7 Track-Type Tractor Electrohydraulic Systems Speed Sensor - Test
953 and 963 Track-Type Loader Systems Bank Valve
953 and 963 Track-Type Loader Systems Piston Motor (Hydrostatic)
C15 and C18 Engines for Caterpillar Built Machines Housing (Front)
Hood Cracks on Certain TH3510D, TH357D and TH408D Telehandlers {7251}
Left-Hand Side Mirror and Bracket Broken on Certain D Series Telehandlers {7319}
C15 and C18 Engines for Caterpillar Built Machines Gear Group (Rear)
D7 Track-Type Tractor Electrohydraulic Systems Ethernet Data Link - Test
Generator and Electric Drive Propulsion Module Disassembly and Assembly Procedures have been updated for Certain 988K XE Wheel Loaders {1603, 4450, 5927}
Inspection, Salvage, Reuse, and Cleaning of 3500 Tier 4 and C175 Tier 4 Engines Fuel Rails and Critical Fuel Lines {1250, 1274, 127A, 7583}
Reverse Camera System Malfunction on Certain Telehandlers {7348}
Pump Suction Hose Cracked on Certain TH357D, TH408D, and TH3510D Telehandlers {5057}
C15 and C18 Engines for Caterpillar Built Machines Turbocharger
C15 and C18 Engines for Caterpillar Built Machines Turbocharger
New Power Train Software is Now Used on Various Load Haul Dump Machines {7620}