Valve Mechanism Cover
`
C15 and C18 Engines for Caterpillar Built Machines
[SENR9831]
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Camshaft
BASIC ENGINE
VALVE MECHANISM GP
Show/hide table
| |
| Illustration 1 | g06570672 |
Show/hide table
| |
| Illustration 2 | g02610257 |
|
Tightening sequence | |
Show/hide table
| Item | Qty | Part | Specification Description |
|---|---|---|---|
| 1 | 18 | 243-1159 Fastener | Torque to |
| 2 | 1 | 272-2583 O-Ring Seal | Before assembly, lubricate the joint surfaces and seal with clean engine oil. |
Show/hide table
| |
| Illustration 3 | g06570673 |
|
455-3837 Valve Cover As | |
Show/hide table
| Item | Qty | Part | Specification Description |
|---|---|---|---|
| 3 | 3 | - | Use the following procedure to tighten the bolts:
1. Before assembly, apply thread lock- adhesive to the threads. 2. Tighten the bolt to |
| 4 | -- | - | Apply Loctite Flange Sealant 5900. |
Information System:
D6 GC Track-Type Tractor Power Train
Transmission - Assemble
Improved Engine Oil Cooler for Certain C7.1 Machine Engines {1378}
A New Actuator Group for the Governor Control Group is Now Used on Certain Compact Wheel Loaders {1265, 1276}
New Torque Converter and Housing Group and Torque Converter Group Are Available for Certain 854K Wheel Dozers and 992K Wheel Loaders {3101, 3105}
Improved Mast Hose Guardrail Group Is Now Used on Certain MD6200 Rotary Drills {79NS}
Improved Installation for Mast Lock Cylinder Is Now Used on Certain MD6200 Rotary Drills {1439, 79NS, 79NT}
Reduced Pilot Hydraulic Filter Change Interval is Now Used on D10T2 Track-Type Tractors {5068}
C18 Tier 4 Engines
Engine Design
D6 GC Track-Type Tractor Power Train
Transmission - Disassemble
D1, D2 and D3 Track-Type Tractors
Bulldozer Blade Pitch
C7 Engines for Caterpillar Built Machines
Crankshaft Rear Seal Carrier - Remove and Install
D1, D2 and D3 Track-Type Tractors
Stopping the Engine
Procedure to Install <NOBR>590-1140</NOBR> Work Tool Lines Gp on Certain Compact Wheel Loaders to Connect Hydromechanical Tools {5057, 6129}
Certain Cat<SUP>® Electronic Control Modules (ECMs) May Have Vulnerabilities If Not Connected Through Cat<SUP>® Gateways {1926, 7490, 7606, 7610}
C15 and C18 Engines for Caterpillar Built Machines
Camshaft
966 GC Wheel Loader Power Train
Output Transfer Gears - Disassemble
966 GC Wheel Loader Power Train
Output Transfer Gears - Assemble
Oil Leaks May Occur Behind the Alternator Pulley On Certain 3512C Well Service Engines {1205, 1207, 1425}
Procedure to Install Secondary Steering on Certain 631K and 637K Wheel Tractor-Scrapers {1408, 4304, 4324, 4334, 7960}
D7 Track-Type Tractors Information Display
Diagnostic Operation
D7 Track-Type Tractors Information Display
Display Features - Start-Up Procedure
D7 Track-Type Tractors Information Display
Performance Pages
D7 Track-Type Tractors Information Display
Display Settings
D7 Track-Type Tractors Information Display
Menu Navigation