Lift Cylinder (Ripper)
`
D4, D6K2 and D6K Track-Type Tractor Systems
[UENR4097]
D4, D6K2 and D6K Track-Type Tractor Systems
Bank Valve (Implement)
D4, D6K2 and D6K Track-Type Tractor Systems
Electronic Control (Hydraulic System)
HYDRAULIC SYSTEM
CYLINDER GP
D4, D6K2 and D6K Track-Type Tractor Systems
Tilt Cylinder (Bulldozer)
D4, D6K2 and D6K Track-Type Tractor Systems
Angle Cylinder (Bulldozer)
D4, D6K2 and D6K Track-Type Tractor Systems
Lift Cylinder (Ripper)
D4, D6K2 and D6K Track-Type Tractor Systems
Operational Checks
D4, D6K2 and D6K Track-Type Tractor Systems
Lift Cylinder (Bulldozer)
D4, D6K2 and D6K Track-Type Tractor Systems
Tilt Cylinder (Bulldozer)
D4, D6K2 and D6K Track-Type Tractor Systems
Angle Cylinder (Bulldozer)
Show/hide table
| |
| Illustration 1 | g06469733 |
Show/hide table
| Item | Qty | Part | Specification Description |
|---|---|---|---|
| 1 | 4 | 173-9779 Bolt | Torque to |
| 2 | - | - | Before assembly, apply Loctite 638 to the wiper seal groove. |
| 3 | 1 | 225-3281 Wiper Seal | Lubricate the sealing lip lightly with the lubricant that is being sealed. |
| 4 | 1 | 289-2948 U-Cup Seal | Lubricate the sealing lip lightly with the lubricant that is being sealed. |
| 5 | 1 | 289-2937 Buffer Seal As | Lubricate the sealing lip lightly with the lubricant that is being sealed. |
| 6 | 1 | 2K-4507 Bushing | Bore before assembly is |
| D1 | 1 | 448-6997 Cylinder As | Bore is |
| D2 | 1 | 9T-2714 Rod As | Diameter is |
| D3 | 1 | 230-4872 Head | Bore over four lands is |
| 7 | 1 | 2J-0564 Locknut | Before assembly, lubricate the threads.
Torque to |
Information System:
Installation Procedure for the <NOBR>454-2355</NOBR> Lines Gp - Coupler on Certain Wheel Loaders {5057, 6129}
D7E Track-Type Tractor
Fuel System Primary Filter/Water Separator - Drain
Installing Additional Gussets and Improved Support Plate on Certain Quick Couplers{6129}
D7E Track-Type Tractor
Power Train System Oil And Screens - Change/Clean
D7E Track-Type Tractor
Fuel System Primary and Secondary Filters - Replace
D7E Track-Type Tractor
Cooling System Components - Clean/Replace
C3.4B Engines
NOx Conversion Is Low
D8T Powered Bottom Guard Retrofit Instructions {7153}
C3.4B Engines
Coolant Temperature Is Low
950 GC Wheel Loader Power Train
Oscillating Axle (Rear) - Remove and Install
D7E Track-Type Tractor
Voltage Sensor - Test
950 GC Wheel Loader Power Train
Tire and Rim (Rear) - Remove and Install
C3.4B Engines
SCR Warning System Problem
950L and 962L Wheel Loaders
Sound Information and Vibration Information
D3K2, D4K2 and D5K2 Track-Type Tractors Systems
Solenoid Valve - Test
C3.4B Engines
CAN Data Link - Test
D3K2, D4K2 and D5K2 Track-Type Tractors Systems
Solenoid Return - Test
C280 Marine Engines
Exhaust Temperature Is Low
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Differential Pinion Preload - Adjust
966K Wheel Loader Electrohydraulic System
Relief Valve (Load Sensing Signal) - Test and Adjust
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Differential Backlash and Bearings - Adjust
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Output Transfer Gears
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement
Engine, Torque Converter, Transmission and Output Transfer Gears - Install
D6N Track-Type Tractor
Brake System