Turbocharger
`
3500B and 3500C Marine Engines
[RENR5077]
3500B and 3500C Marine Engines
Turbocharger
3500B and 3500C Marine Engines
Engine Oil Cooler Bypass and Cooling Jet Sequence Valves
AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
Show/hide table
| |
| Illustration 1 | g06413355 |
Show/hide table
| Item | Qty | Part | Specification Description |
| 1 | 1 | 283-4294 Clamp As | Use the following procedure to tighten the nut of the clamp assembly:
1. Before assembly, lubricate the threads with Loctite C5A Copper Anti-Seize. 2. Tighten the nut approximately to 3. Gently hit around the clamp assembly with a soft hammer. 4. Again, tighten the nut to 5. Again, gently hit around the clamp assembly with a soft hammer. 6. Again, tighten the nut to |
| 2 | 8 | 287-7200 Bolt | Torque to |
| 3 | 1 | 332-0971 Plug As | Torque to |
Information System:
2009/09/30
A New Steering Filter Cover is Now Used {4304, 5068}
Frozen Water Damages the Radiator Guard{7155}
C27 and C32 Engines for Caterpillar Built Machines
Component Location
2009/09/30
Water Pump Operation {1361, 7555}
2009/09/30
Water Pump Operation {1361, 7555}
AD30 Underground Articulated Truck
Additional Messages
2010/01/22
Improved Track Rollers Are Now Used On the D10T {4180}
2009/10/29
Improved Gaskets for the Oil Filter Base Are Now Used on Certain Engines {1306, 1308, 7555}
2009/09/21
A Guard For the Pivot Shaft Seal Is Now Used On the D11T {4151}
953D, 963D and 973D Track-Type Loaders Monitoring System
Electrical Connector - Inspect
2009/09/28
Replacement Of The Gasket For The Rear Transmission Cover {3030, 7555}
2009/10/16
Correction to Systems Operation Testing and Adjusting , "Pressure Reducing Valve (Pilot Oil) - Test and Adjust" {5117}
(Custom) 367-7349 and Quick Coupler For Wheel Loaders
Declaration of Conformity
3500B and 3500C Auxiliary Engines, Generator Set Engines, and Generator Sets
Plate Locations and Film Locations
988H Wheel Loader Electrohydraulic System
System Schematic
Procedure To Increase The Serviceability Of The Air Cleaner On D7G2 Machines That Are Equipped With A 273-9225 Engine Enclosure Group Or A 291-5668 Engine Enclosure Group {1051}
924H, 924Hz, 928Hz and 930H Wheel Loaders Machine Systems
Lift Cylinder - Remove and Install
986H Wheel Loader
Camera - If Equipped
Orientation of the 285-4106 Valve Cover Seal and the 217-5701 Bulk Seal {1107}
2009/09/30
New AccuGrade Software Version 11.10-B is Now Available {7220}
(Custom) 356-2124 Fusion Pallet Fork
Declaration of Conformity
A System Malfunction on the Blade Float on Certain Track-Type Tractor Differential Steering{5057}
930G Wheel Loader Machine Systems
Piston Pump (Steering, Implement, Pilot) - Disassemble
930G Wheel Loader Machine Systems
Piston Pump (Steering, Implement, Pilot) - Assemble