3500 Engines Housing (Front) Caterpillar


Housing (Front)
`


Illustration 1g02847417

Table 1
Specification for 333-3712 Front Housing Gp 
Item  Qty  Part  Specification Description 
Use a standard torque for the fasteners. 
9H-8260 Bolt  Length of 1/2 diameter inch bolt is 158.75 mm (6.250 inch)
0S-1587 Bolt  Length of 1/2 diameter inch bolt is 44.45 mm (1.750 inch)
2A-5220 Plug  Torque to 25 ± 5 N·m (221 ± 44 lb in)
8T-6765 Pipe Plug  Length of 1/4 diameter inch plug is 14.2 mm (0.56 inch)
10  1D-4593 Bolt  Length of 5/8 diameter inch bolt is 139.7 mm (5.50 inch)
3P-1896 Cup Plug  Installation depth is 1.25 ± 0.25 mm (0.050 ± 0.010 inch)
Trim gasket (6) with face (7) after assembly. 

Information System:

992K Wheel Loader Electrohydraulic System MID 082 - CID 0463 - FMI 11
992K Wheel Loader Electrohydraulic System MID 082 - CID 0463 - FMI 06
854G and 854K Wheel Dozers and 992G, 992K and 994F Wheel Loaders VIMS<SUP>TM MID 049 - CID 0890 - FMI 09
992K Wheel Loader Electrohydraulic System MID 082 - CID 0463 - FMI 05
992K Wheel Loader Electrohydraulic System MID 082 - CID 0463 - FMI 03
2009/11/12 Protective Covers For the Equalizer Bar Are Now Used On the D11T {7206}
988H Wheel Loader Electrohydraulic System Main Control Valve
992K Wheel Loader Electrohydraulic System MID 082 - CID 0361 - FMI 11
992K Wheel Loader Electrohydraulic System MID 082 - CID 0360 - FMI 11
C4.4 Industrial Engine Engine Oil Level - Check
3500 Engines Flywheel Housing
854G and 854K Wheel Dozers and 992G, 992K and 994F Wheel Loaders VIMSTM MID 049 - CID 0600 - FMI 06
992K Wheel Loader Electrohydraulic System MID 082 - CID 2360 - FMI 04
992K Wheel Loader Electrohydraulic System MID 082 - CID 0590 - FMI 14
992K Wheel Loader Electrohydraulic System MID 082 - CID 1571 - FMI 11
C13, C15, and C18 Tier 4 Interim Engines ARD Failed to Ignite
AD30 Underground Articulated Truck Lifting and Tying Down the Machine
2009/10/16 Correction to Systems Operation Testing and Adjusting , "Pressure Reducing Valve (Pilot Oil) - Test and Adjust" {5117}
2009/09/28 Replacement Of The Gasket For The Rear Transmission Cover {3030, 7555}
953D, 963D and 973D Track-Type Loaders Monitoring System Electrical Connector - Inspect
2009/09/21 A Guard For the Pivot Shaft Seal Is Now Used On the D11T {4151}
2009/10/29 Improved Gaskets for the Oil Filter Base Are Now Used on Certain Engines {1306, 1308, 7555}
2010/01/22 Improved Track Rollers Are Now Used On the D10T {4180}
AD30 Underground Articulated Truck Additional Messages