953D Track-Type Loader Machine Systems Window Wiper and Wiper Motor Caterpillar


Window Wiper and Wiper Motor
`
953D Track-Type Loader Machine Systems [KENR5175]
OPERATOR STATION
WASHER GP-WINDOW
953D Track-Type Loader Machine Systems Window Wiper and Wiper Motor


Illustration 1g01951095

(1) Torque for two nuts of the window wiper motor group ... 19 ± 1 N·m (168 ± 9 lb in)

(2) Torque for two connector assemblies ... 0.35 ± 0.05 N·m (3.10 ± 0.44 lb in)

(3) Use the following procedure in order to install the window wiper arm:

  1. Tighten the nut of the window wiper arm to 23 ± 1 N·m (204 ± 9 lb in).

  2. After a minimum of 0.5 hours to a maximum of 4 hours, tighten the nut of the window wiper arm to 23 ± 1 N·m (204 ± 9 lb in).

Note: The minimum torque check for the nut of the window wiper arm (3) in the field is 12 N·m (106 lb in).



Illustration 2g01951106
Detail of area A
(5) Window wiper motor group

(4) Use the following procedure in order to install the window wiper arm:

  1. Tighten the nut of the window wiper arm to 21 ± 1 N·m (186 ± 9 lb in).

  2. After a minimum of 0.5 hours to a maximum of 4 hours, tighten the nut of the window wiper arm to 21 ± 1 N·m (186 ± 9 lb in).

Note: The minimum torque check for the nut of the window wiper arm (4) in the field is 12 N·m (106 lb in).



Illustration 3g01951407
Window wiper motor group (front)

Note: Apply Loctite Dri-Loc 202 to the mounting threads of the window wiper motor group before assembly.

(6) If the window wiper motor is mounted in glass tighten to 6.5 ± 0.5 N·m (57.5 ± 4.4 lb in). If the window wiper motor is mounted in steel tighten to 9 ± 1 N·m (80 ± 9 lb in).

(7) If the window wiper motor is mounted in glass tighten to 6.5 ± 0.5 N·m (57.5 ± 4.4 lb in). If the window wiper motor is mounted in steel tighten to 7.5 ± 0.5 N·m (66.4 ± 4.4 lb in).

Information System:

C3.4B Engines for Caterpillar Built Machines Alternator - Test
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train MID 081 - CID 0070 - FMI 04
AD55B Underground Articulated Truck Additional Messages
AD55B Underground Articulated Truck Safety Messages
966H Wheel Loader and 972H Wheel Loader Braking and Hydraulic Fan System Pressure Switch (Parking Brake Oil)
D6T Track-Type Tractor Systems Hydraulic Fan Speed (On Demand) - Test and Adjust
Camshaft Lobe Hits Fuel Transfer Pump.{1210, 1256}
953D, 963D and 973D Track-Type Loaders Ripper Does Not Function
953D, 963D and 973D Track-Type Loaders Implement Cycle Time Is Fast
C12 Marine Engines and C12 Power Package Maintenance Recommendations
973D Track-Type Loader Declaration of Conformity
C9.3 Engines for Caterpillar Built Machines Diesel Particulate Filter - Remove and Install
C9.3 Engine and D7E Track-Type Tractors Power Train Oil Cooler - Remove and Install
Piston Seizures on C18 Engines{1225, 1331}
D7E Track-Type Tractor Hydraulic, HVAC, and Electrical Systems Hydraulic System Oil Contains Air
D7E Track-Type Tractor Hydraulic, HVAC, and Electrical Systems Hydraulic System Oil Level Is Low
D7E Track-Type Tractor Hydraulic, HVAC, and Electrical Systems Hydraulic System Oil Temperature Is High
953D, 963D and 973D Track-Type Loaders Steering Does Not Function
953D, 963D and 973D Track-Type Loaders Steering Does Not Function in One Direction
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train MID 081 - CID 0070 - FMI 03
973D Track-Type Loader Machine Systems Window Wiper and Wiper Motor
D6T XE Electrical & Hydraulic Troubleshooting Hydraulic Fan Does Not Function
988H Wheel Loader Declaration of Conformity
D6T XE Electrical & Hydraulic Troubleshooting Hydraulic Fan Does Not Shut Off