Track Roller Frame
`
973D Track-Type Loader Power Train
[KENR6524]
973D Track-Type Loader Power Train
Location of Electrical Components
973D Track-Type Loader Power Train
Brake System
UNDERCARRIAGE
FRAME GP-TRACK ROLLER
973D Track-Type Loader Power Train
Track Roller Frame
Show/hide table
| |
| Illustration 1 | g06272501 |
|
Typical example | |
Show/hide table
| Item | Qty | Part | Specification description |
|---|---|---|---|
| 1 | 2 | 221-3201 Bushing | Inside diameter after assembly is |
| 2 | 2 | 221-3200 Bushing | Inside diameter after assembly is |
| 3 | 2 | 2S-4078 O-Ring Seal | Lubricate the seal lightly with the lubricant that is being sealed. |
Show/hide table
| (1) | The bushing must be flush with the surface |
Information System:
C9.3 Engine for Caterpillar Built Machines
Cylinder Head Valves
2009/07/20
Improved Sun Gears and Planetary Gears Are Now Used in the Second Reduction of the D11R and the D11T Final Drive {4050}
Field Installation of the Communication Installation Group that is Product Link 321SR{7606}
Field Installation of the Communication Installation Group{7606}
Field Installation of the Product Link PL321{7606}
D7E Track-Type Tractor Power Train Systems
Power Train Oil Contains Air
D4 and D6K Track-Type Tractor
Restricted Visibility
2009/07/01
Water Temperature Regulators (Thermostats) Have Been Redesigned {1355, 1380, 1393}
2009/07/06
Water Temperature Regulators (Thermostats) Have Been Redesigned {1355, 1380, 1393}
3500 Engines
Electronic Control Module (Engine) - Remove and Install
3500 Engines
Prelubrication Oil Pump - Remove and Install
973 K Track-Type Loaders
Front Idler and Recoil Spring
A Film Is Missing for the Equalizer Bar End Plug{7206, 7557}
D7E Track-Type Tractor Power Train Systems
Brake Does Not Release
2009/07/06
New AMOCS Seals That Are Between the Radiator Core and the Tank Are Now in Production on D10T Track-Type Tractors and D11T Track-Type Tractors {1353}
973D Track-Type Loader Power Train
Brake System
D6N Track-Type Tractor
Declaration of Conformity
Procedure to Install an Improved Harness for the Battery Isolation Control{1402, 1408, 1411}
Procedure to Install an Improved Harness for the Battery Isolation Control{1402, 1408, 1411}
3500 Engines
Fuel Priming Pump - Remove and Install
3500 Engines
Turbocharger - Remove
2009/09/30
Changes to the Gasket for the Engine Oil Filter Base on Some C11 and C13 Engines {1306, 7555}
D7E Track-Type Tractor Power Train Systems
Power Train Oil Temperature Is High
3500 Engines
Turbocharger - Install