Front Idler and Recoil Spring
`
973 K Track-Type Loaders
[M0087727]
FRAME AND BODY
GUARD GP
973 K Track-Type Loaders
Front Idler and Recoil Spring
Show/hide table
| |
| Illustration 1 | g06273369 |
|
Typical example Front view | |
Show/hide table
| Item | Qty | Part | Specification Description |
|---|---|---|---|
| - | - | - | Lubricate the sealing lip of the lip type seal lightly with the lubricant that is being sealed. |
| - | - | - | Before assembly, apply Loctite C5A Copper anti-seize compound to the support. |
| - | - | - | Apply a thin coat of SAE 30 oil to the outer diameter of the rod in the yoke assembly |
| - | - | - | Bearing seating surfaces must be free of paint. Apply grease to the seating surfaces before assembly of the bearing. |
| - | - | - | Before assembly, apply a thin coat of SAE 30 on the outside diameter of the piston and the inside diameter of the cylinder. |
| 1 | 1 | 8C-5177 O-Ring Seal | Lubricate the O-ring seal lightly with the lubricant that is being sealed. |
| 2 | 4 | 7X-2563 Bolt | Torque to |
Show/hide table
| |
| Illustration 2 | g06273372 |
|
View A-A | |
Show/hide table
| Item | Qty | Part | Specification Description |
|---|---|---|---|
| 3 | 2 | 9W-4477 Track Idler Cap Gp | Use the following procedure to tighten the bolt of track idler cap group: 1. Before assembly, apply Loctite C5A Copper anti-seize compound to the threads. 2. Tighten the bolt on the abutment side of the track idler cap assembly first. Then, tighten the other side of the bolt in the track idler cap assembly . 3. Tighten the bolt (4) to |
Information System:
973 K Track-Type Loaders
Equalizer Bar
973D Track-Type Loader Power Train
Location of Electrical Components
C9.3 Engines for Caterpillar Built Machines
Engine Control Module - Remove and Install
2009/06/29
Improvements to the Lines Group for the Lift Cylinder on 938H and IT38H Machines {5057, 5102}
C6.6 Industrial Engine
Exhaust Gas Valve (NRS)
973D Track-Type Loader Power Train
Hydrostatic Drive Motor
966H and 972H Wheel Loaders Machine Systems
Lubrication Pump (Automatic) - Disassemble
966H and 972H Wheel Loaders Machine Systems
Lubrication Pump (Automatic) - Assemble
Generator Bearing Service {4457}
973D Track-Type Loader Power Train
Track Roller
C4.4 Industrial Engine
Refrigerant Compressor
2009/06/29
An Improved Adjustable Armrest Is Now Available {7307}
3500 Engines
Prelubrication Oil Pump - Remove and Install
3500 Engines
Electronic Control Module (Engine) - Remove and Install
2009/07/06
Water Temperature Regulators (Thermostats) Have Been Redesigned {1355, 1380, 1393}
2009/07/01
Water Temperature Regulators (Thermostats) Have Been Redesigned {1355, 1380, 1393}
D4 and D6K Track-Type Tractor
Restricted Visibility
D7E Track-Type Tractor Power Train Systems
Power Train Oil Contains Air
Field Installation of the Product Link PL321{7606}
Field Installation of the Communication Installation Group{7606}
Field Installation of the Communication Installation Group that is Product Link 321SR{7606}
2009/07/20
Improved Sun Gears and Planetary Gears Are Now Used in the Second Reduction of the D11R and the D11T Final Drive {4050}
C9.3 Engine for Caterpillar Built Machines
Cylinder Head Valves
973D Track-Type Loader Power Train
Track Roller Frame