973D Track-Type Loader Power Train Hydrostatic Drive Motor Caterpillar


Hydrostatic Drive Motor
`
1.1. Motor Head Group



Illustration 1g01946666

Rotation ... Bidirectional

Maximum displacement per revolution ... 280 cc (17 cubic inch)

Minimum displacement per revolution ... 70 cc (4 cubic inch)

Flow at a pressure drop of 700 kPa (102 psi) and at a temperature of 40 °C (104 °F) ... 68 L/min (18 US gpm)

(1) Torque for the O-ring plug ... 198 N·m (146 lb ft)

Note: Apply 4C-4030 Thread Lock Compound to the threads of the screws.

(2) Torque for 18 screws ... 15.5 ± 1.5 N·m (137.2 ± 13.3 lb in)

Motor Head Group




Illustration 2g01946668

(3) Pilot valve group

(4) Torque for eight bolts ... 310 N·m (229 lb ft)

(5) Torque for two O-ring plugs ... 147 N·m (108 lb ft)




Illustration 3g01946670

Pilot valve group

(6) Torque for the O-ring plug ... 25 N·m (221 lb in)

(7) Torque for four bolts ... 215 N·m (159 lb ft)

(8) Solenoid assembly

Torque for the solenoid assembly ... 19 N·m (168 lb in)
Torque for the cap ... 5 N·m (44 lb in)
Coil resistance at 20 °C (68 °F) ... 4.26 Ohms
Operating voltage ... 12 or 24 VDC

(9) Torque for the adjustment nut ... 44 N·m (32 lb ft)

(10) Torque for the cap nut ... 44 N·m (32 lb ft)

Information System:

966H and 972H Wheel Loaders Machine Systems Lubrication Pump (Automatic) - Disassemble
966H and 972H Wheel Loaders Machine Systems Lubrication Pump (Automatic) - Assemble
Generator Bearing Service {4457}
973D Track-Type Loader Power Train Track Roller
C4.4 Industrial Engine Refrigerant Compressor
2009/06/29 An Improved Adjustable Armrest Is Now Available {7307}
725C, 725C2, 730C, 730C Ejector, 730C2, 730C2 EJ, 735B, 735C, 740B, 740B Ejector, 740C Ejector and 745C Articulated Trucks VIMSTM</SUP> 3G Using Caterpillar Electronic Technician to Determine Diagnostic Codes
973D Track-Type Loader Power Train General Information
2009/07/06 The Undercarriage Has Been Changed To Camber Only {4150}
973D Track-Type Loader Hydraulic System Location of Electrical Components
2009/08/10 An Improved Engine Oil Pump Assembly Is Used {1304}
Procedure To Rework the Torque Converter and Updrive Housing Speed Sensor Mount{3101, 3159, 3175}
C6.6 Industrial Engine Exhaust Gas Valve (NRS)
2009/06/29 Improvements to the Lines Group for the Lift Cylinder on 938H and IT38H Machines {5057, 5102}
C9.3 Engines for Caterpillar Built Machines Engine Control Module - Remove and Install
973D Track-Type Loader Power Train Location of Electrical Components
973 K Track-Type Loaders Equalizer Bar
973 K Track-Type Loaders Front Idler and Recoil Spring
3500 Engines Prelubrication Oil Pump - Remove and Install
3500 Engines Electronic Control Module (Engine) - Remove and Install
2009/07/06 Water Temperature Regulators (Thermostats) Have Been Redesigned {1355, 1380, 1393}
2009/07/01 Water Temperature Regulators (Thermostats) Have Been Redesigned {1355, 1380, 1393}
D4 and D6K Track-Type Tractor Restricted Visibility
D7E Track-Type Tractor Power Train Systems Power Train Oil Contains Air