973D Track-Type Loader Machine Systems Cutting Edges, End Bits and Teeth Caterpillar


Cutting Edges, End Bits and Teeth
`
973D Track-Type Loader Machine Systems [KENR6527]
WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
973D Track-Type Loader Machine Systems Cutting Edges, End Bits and Teeth


Illustration 1g01945453
Typical example
3G-5126 Bit and Cutting Edge Gp
1U-0763 Bit and Cutting Edge Gp

(1) Torque for 16 bolts ... 2300 ± 300 N·m (1696 ± 221 lb ft)



Illustration 2g01945456
Typical example
100-6667 Cutting Edge Gp
6Y-7237 Segment Edge Gp
143-3062 Segment Edge Gp

(2) Torque for 14 bolts ... 2300 ± 300 N·m (1696 ± 221 lb ft)



Illustration 3g01945458
Typical example
257-1750 Long Tooth Gp
257-1751 Penetration Tooth Gp
257-1775 Extra Duty Tooth Gp
269-4611 Short Tooth Group

(2) Torque for 16 bolts ... 2300 ± 300 N·m (1696 ± 221 lb ft)

Information System:

973 K Track-Type Loaders Track Roller - Double Flange
C27 Engine for the AD55B Underground Articulated Truck Fuel Temperature Is High
C27 Engine for the AD55B Underground Articulated Truck Electronic Service Tool Does Not Communicate
C27 Engine for the AD55B Underground Articulated Truck Fuel Filter Is Restricted
C27 Engine for the AD55B Underground Articulated Truck Exhaust Has Excessive White Smoke
C27 Engine for the AD55B Underground Articulated Truck Exhaust Has Excessive Black Smoke
C27 Engine for the AD55B Underground Articulated Truck Engine Stalls at Low RPM
C27 Engine for the AD55B Underground Articulated Truck Engine Overspeeds
C27 Engine for the AD55B Underground Articulated Truck Engine Has Mechanical Noise (Knock)
973D Track-Type Loader Hydraulic System Control Valve (Implement)
2014/09/12 New Alternators for C6.6 and C4.4 Engines {1405, 1425}
2010/04/15 New Alternators for 3054C, C4.4 and C6.6 Engines {1405, 1425}
Procedure For Retrofitting The D6K Track-Type Tractor With The AccuGrade</SUP> Harness{7220}
2009/06/22 New AccuGrade Version 11.10 Software is Now Available {7220, 7620}
C13, C15, and C18 Tier 4 Interim Engines ARD Ignition - Test
D6K Track-Type Tractor Machine Systems Pump Mounting - Remove and Install
Procedure To Rework the Torque Converter and Updrive Housing Speed Sensor Mount{3101, 3159, 3175}
2009/08/10 An Improved Engine Oil Pump Assembly Is Used {1304}
973D Track-Type Loader Hydraulic System Location of Electrical Components
2009/07/06 The Undercarriage Has Been Changed To Camber Only {4150}
973D Track-Type Loader Power Train General Information
725C, 725C2, 730C, 730C Ejector, 730C2, 730C2 EJ, 735B, 735C, 740B, 740B Ejector, 740C Ejector and 745C Articulated Trucks VIMSTM</SUP> 3G Using Caterpillar Electronic Technician to Determine Diagnostic Codes
2009/06/29 An Improved Adjustable Armrest Is Now Available {7307}
C4.4 Industrial Engine Refrigerant Compressor