Track Roller - Single Flange
`
973 K Track-Type Loaders
[M0087727]
UNDERCARRIAGE
ROLLER GP
973 K Track-Type Loaders
Track Roller - Single Flange
973 K Track-Type Loaders
Track Roller - Double Flange
953 and 963 Track-Type Loader Systems
Track Carrier Roller
Show/hide table
![]() | |
Illustration 1 | g06248531 |
Show/hide table
Item | Qty | Part | Specification Description |
---|---|---|---|
1 | 4 | 8T-0666 Bolt | Torque to |
Show/hide table
![]() | |
Illustration 2 | g06272447 |
347-4834 Track Roller Gp |
Show/hide table
Item | Qty | Part | Specification Description |
---|---|---|---|
2 | 2 | 218-8554 Collar | Before assembly, lubricate the bore lightly with the lubricant that is being sealed. |
3 | 2 | 4S-8984 Duo-Cone Seal Gp | The rubber toric seals and all the contacting surfaces must be clean and dry at assembly. Before assembly, apply a thin layer of oil to the contacting surfaces of the metal seal rings. The seal rings must be assembled square. The rubber toric seal should not bulge and the rubber toric seal should not twist. Refer to Special Instruction, SEHS8364, "Assembly and Installation of Conventional Duo-Cone Seals". |
4 | 2 | 9M-9729 O-Ring Seal | Before assembly, lubricate the seal. |
5 | 2 | 124-8267 Bushing | Before assembly, lubricate the surfaces of the bushing. |
6 | 1 | 1P-8784 Bushing | Bore after assembly is |
A | - | - | Distance between the bushing and the face of the roller rim on each side is |
B | - | - | Extension of the track roller shaft from the collar is |
- | - | - | End play for the track roller shaft is: Minimum is Maximum is |
Information System:
C13, C15, and C18 Tier 4 Interim Engines
Sensor Signal (Analog, Active) - Test
2009/09/30
Shims are Available for Improved Strength of Draft Arm and the Bearing Joint on Wheel Tractor-Scrapers {6207, 6245}
2009/06/29
Correction to Specifications , "Lockup Clutch and Solenoid Valve (Torque Converter)" {3124, 5479}
966H Wheel Loader and 972H Wheel Loader Electrohydraulic System
Piston Pump (Implement) (Pilot)
2009/07/20
The Mounting of the Transmission Tube Assemblies has been Improved {3154}
C13 Tier 4 Final Engines
Water Pump - Test
D10T Track-Type Tractor
Hydraulic System Filter Bypass Screen - Clean
C13 Tier 4 Final Engines
Water Temperature Regulator - Test
2009/06/29
Correction to Specifications , "Service and Parking Brake" {4251, 4267}
2009/06/29
Correction to Specifications , "Service and Parking Brake" {4251, 4267}
D8T Track-Type Tractor
Hydraulic System Filter Screens - Clean
980H Wheel Loader Machine Systems
Lubrication Pump (Automatic) - Assemble
2010/04/15
New Alternators for 3054C, C4.4 and C6.6 Engines {1405, 1425}
2014/09/12
New Alternators for C6.6 and C4.4 Engines {1405, 1425}
973D Track-Type Loader Hydraulic System
Control Valve (Implement)
C27 Engine for the AD55B Underground Articulated Truck
Engine Has Mechanical Noise (Knock)
C27 Engine for the AD55B Underground Articulated Truck
Engine Overspeeds
C27 Engine for the AD55B Underground Articulated Truck
Engine Stalls at Low RPM
C27 Engine for the AD55B Underground Articulated Truck
Exhaust Has Excessive Black Smoke
C27 Engine for the AD55B Underground Articulated Truck
Exhaust Has Excessive White Smoke
C27 Engine for the AD55B Underground Articulated Truck
Fuel Filter Is Restricted
C27 Engine for the AD55B Underground Articulated Truck
Electronic Service Tool Does Not Communicate
C27 Engine for the AD55B Underground Articulated Truck
Fuel Temperature Is High
973 K Track-Type Loaders
Track Roller - Double Flange