950H Wheel Loader, 962H Wheel Loader and IT62H Integrated Toolcarrier Power Train Transmission Planetary Caterpillar


Transmission Planetary
`
950H Wheel Loader, 962H <BR>Wheel Loader and IT62H <BR>Integrated Toolcarrier Power Train [RENR8864]
POWER TRAIN
TRANSMISSION GP
950H Wheel Loader, 962H Wheel Loader and IT62H Integrated Toolcarrier Power Train Transmission Planetary



Illustration 1g02942437

Table 1
Specification for 186-2522 Transmission Planetary Gp    
Item     Qty     Part     Specification Description    
1     2     6V-8197 Bolt     Torque to 120 ± 20 N·m (89 ± 15 lb ft).    
2     15     294-0877 Special Bolt     Torque to
120 ± 20 N·m (89 ± 15 lb ft).    
3     1     8T-0106 Bolt     Torque to
120 ± 20 N·m (89 ± 15 lb ft).    
4     Thickness of five new friction discs and five new plates is
40.525 ± 1.175 mm (1.5955 ± 0.0463 inch):    
5 6Y-5352 Friction Disc     Thickness of one new friction disc is
4.925 ± 0.105 mm (0.1939 ± 0.0041 inch).    
5 7G-0437 Plate     Thickness of one new plate is
3.18 ± 0.13 mm (0.125 ± 0.005 inch).    
5     Thickness of five new friction discs and five new plates is
40.525 ± 1.175 mm (1.5955 ± 0.0463 inch):    
5 6Y-5352 Friction Disc     Thickness of one new friction disc is
4.925 ± 0.105 mm (0.1939 ± 0.0041 inch).    
5 7G-0437 Plate     Thickness of one new plate is
3.18 ± 0.13 mm (0.125 ± 0.005 inch).    
6     Thickness of three new friction discs and three new plates is
24.315 ± 0.705 mm (0.9573 ± 0.0278 inch):    
3 6Y-5352 Friction Disc     Thickness of one new friction disc is
4.925 ± 0.105 mm (0.1939 ± 0.0041 inch).    
3 7G-0437 Plate     Thickness of one new plate is
3.18 ± 0.13 mm (0.125 ± 0.005 inch).    
7     Thickness of two new friction discs and two new plates is
16.21 ± 0.47 mm (0.638 ± 0.019 inch):    
2 6Y-5352 Friction Disc     Thickness of one new friction disc is
4.925 ± 0.105 mm (0.1939 ± 0.0041 inch).    
2 7G-0437 Plate     Thickness of one new plate is
3.18 ± 0.13 mm (0.125 ± 0.005 inch).    
8     Thickness of five new friction discs and four new plates is
37.47 ± 0.92 mm (1.475 19 ± 0.036 inch):    
5 3T-9960 Friction Disc     Thickness of one new friction disc is
4.95 ± 0.08 mm (0.195 ± 0.003 inch).    
4 6P-7968 Plate     Thickness of one new plate is
3.18 ± 0.13 mm (0.125 ± 0.005 inch).    
9     Thickness of four new friction discs and five new plates is
35.60 ± 1.07 mm (1.402 ± 0.042 inch):    
4 6Y-5352 Friction Disc     Thickness of one new friction disc is
4.925 ± 0.105 mm (0.1939 ± 0.0041 inch).    
5 7G-0437 Plate     Thickness of one new plate is
3.18 ± 0.13 mm (0.125 ± 0.005 inch).    
10     1     6V-5696 Bolt     Torque to
120 ± 20 N·m (89 ± 15 lb ft).    
11     4     6V-4248 Bolt     Torque to
70 ± 15 N·m (52 ± 11 lb ft).    
12     4     3T-7584 Spring     Length under test force is
94.96 mm (3.739 inch).
Test force is
154.40 ± 12.35 N (34.71 ± 2.78 lb).
Free length after test is
124.4 mm (4.90 inch).    
13     8     363-4541 Spring     Length under test force is
37.82 mm (1.489 inch).
Test force is
93.6 ± 5.6 N (21.1 ± 1.3 lb).
Free length after test is
46.90 mm (1.846 inch).    
14     4     9G-5828 Spring     Length under test force is
45.7 mm (1.79921 inch).
Test force is
150.5 ± 12.0 N (33.8 ± 2.7 lb).
Free length after test is
62.0 mm (2.44 inch).    
15     5     7G-5675 Seal Ring     Lubricate the sealing lip lightly with the lubricant that is being sealed.    
16     1     7G-5730 Seal Ring     Lubricate the sealing lip lightly with the lubricant that is being sealed.    
17     1     6P-7772 Seal Ring     Lubricate the sealing lip lightly with the lubricant that is being sealed.    
18     5     6P-7773 Seal Ring     Lubricate the sealing lip lightly with the lubricant that is being sealed.    

Information System:

D6T Track-Type Tractor Hydraulic System Lift Cylinder (Bulldozer)
973 K Track-Type Loaders Lift Cylinder
Installation and Initial Start-Up Procedure for Certain Engines {1000}
3304B and 3306B Engines for Caterpillar Built Machines Engine Oil Pump - Assemble
2009/11/16 New Window Washer Tank Group is Available for Certain Wheel Tractor-Scrapers {7306}
Installation of the Payload Monitoring System in Certain Wheel Loaders {7494}
Rework Procedure To Update the Radiator Group{1353, 7251}
C15 and C18 Tier 4 Final Engines General Information
C7.1 Industrial Engine Exhaust Combustion (ARD) - Aftertreatment Regeneration Device
3304B and 3306B Engines for Caterpillar Built Machines Engine Oil Pump - Disassemble
2009/06/15 New Fasteners for the Valve Mechanism Cover {1107, 1120}
2009/08/17 A New Baffle, A New Bracket, and New Seals Are Now Available On Certain Wheel Tractor-Scrapers {1353, 7251}
2009/06/15 Improved Hardware and Software for the Impeller Clutch on the 993K Torque Converter {1365, 3004, 3067, 3101, 4800, 4808, 7610, 7620}
Undersized Front Track Roller Frame Bearing{4151}
C9.3 Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install
C15 and C18 Tier 4 Final Engines Lubrication System
2009/10/01 A New Gasket and Hardware Are Used for the Water Lines In Some 3500 and G3500 Engines {1052, 1380}
D7R Series II Track-Type Tractor Engine Air Filter Primary and/or Secondary Element - Clean/Replace
973D Track-Type Loader Hydraulic System Ripper Cylinder
973D Track-Type Loader Hydraulic System Bucket Control Group
C15 and C18 Tier 4 Final Engines Basic Engine
C15 and C18 Tier 4 Final Engines Cooling System
973D Track-Type Loader Power Train Power Train Electrohydraulic System
Undercarriage Reconditioning Bulletin Contents {0374, 4150}