C7.1 Industrial Engine Exhaust Combustion (ARD) - Aftertreatment Regeneration Device Caterpillar


Exhaust Combustion (ARD) - Aftertreatment Regeneration Device
`


Illustration 1g01950267
Typical example

(1) Tighten the hoses to the following torque. ... 16 N·m (12 lb ft)

(2) Tighten the nuts to an initial torque. ... 23 N·m (17 lb ft)

(2) Tighten the nuts to a final torque. ... 28 N·m (21 lb ft)

(3) Tighten the temperature sensor to the following torque. ... 45 N·m (33 lb ft)

(4) Tighten the hose to the following torque. ... 20 N·m (15 lb ft)

(5) Tighten the capscrew to the following torque. ... 1.7 N·m (15 lb in)



Illustration 2g01952334
Typical example

(6) Tighten the setscrew to the following torque. ... 9 N·m (80 lb in)

(7) Tighten the setscrews to the following torque. ... 28 N·m (21 lb ft)



Illustration 3g01952354
Typical example

(8) Tighten the setscrew to the following torque. ... 9 N·m (80 lb in)

(9) Tighten the clamps to the following torque. ... 11 N·m (97 lb in)

Information System:

3304B and 3306B Engines for Caterpillar Built Machines Engine Oil Pump - Disassemble
2009/06/15 New Fasteners for the Valve Mechanism Cover {1107, 1120}
2009/08/17 A New Baffle, A New Bracket, and New Seals Are Now Available On Certain Wheel Tractor-Scrapers {1353, 7251}
2009/06/15 Selection of Wire Rope and Use for PACCAR Winches {5163}
2010/05/27 An Improved Oil Supply Line for the Turbocharger Is Used on Some Track-Type Tractors {1052, 1307}
2009/06/08 An Improved Hydraulic Hose Assembly With Improved Routing Is Now Used For the Head End Of the Hydraulic cylinders On the Ripper {5057, 5352, 6310}
D6T Track-Type Tractor Hydraulic System Piston Pump (Fan Drive)
973 K Track-Type Loaders Hydraulic Manifold (Bank Valve Outlet)
973 K Track-Type Loaders Control Valve (Ripper)
2009/06/01 Correction to Disassembly and Assembly , "Differential and Bevel Gear (Front) - Install" {3256, 3258}
973D Track-Type Loader Engine Starting with Jump Start Cables
973 K Track-Type Loaders Control Valve (Multipurpose Bucket)
C15 and C18 Tier 4 Final Engines General Information
Rework Procedure To Update the Radiator Group{1353, 7251}
Installation of the Payload Monitoring System in Certain Wheel Loaders {7494}
2009/11/16 New Window Washer Tank Group is Available for Certain Wheel Tractor-Scrapers {7306}
3304B and 3306B Engines for Caterpillar Built Machines Engine Oil Pump - Assemble
Installation and Initial Start-Up Procedure for Certain Engines {1000}
973 K Track-Type Loaders Lift Cylinder
D6T Track-Type Tractor Hydraulic System Lift Cylinder (Bulldozer)
950H Wheel Loader, 962H Wheel Loader and IT62H Integrated Toolcarrier Power Train Transmission Planetary
2009/06/15 Improved Hardware and Software for the Impeller Clutch on the 993K Torque Converter {1365, 3004, 3067, 3101, 4800, 4808, 7610, 7620}
Undersized Front Track Roller Frame Bearing{4151}
C9.3 Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install